20 March, 2023
100% Correct Cisco 352-001 Dumps Questions Online
Cause all that matters here is passing the Cisco 352-001 exam. Cause all that you need is a high score of 352-001 CCDE Written Exam exam. The only one thing you need to do is downloading Pass4sure 352-001 exam study guides now. We will not let you down with our money-back guarantee.
Check 352-001 free dumps before getting the full version:
Question 1
You are performing a BGP design review for a service provider that offers MPLS-based services to
their end customers. The network is comprised of several PE routers that run iBGP with a pair of route reflectors for all BGP address families. Which two options about the use of Constrained Route Distribution for BGP/MPLS VPNs are true? (Choose two.)
their end customers. The network is comprised of several PE routers that run iBGP with a pair of route reflectors for all BGP address families. Which two options about the use of Constrained Route Distribution for BGP/MPLS VPNs are true? (Choose two.)
Question 2
A network designer wants to improve a company network design due to multiple network crashes.
Which technology would allow for the restore of a network connection without informing the Layer 3 protocol?
Which technology would allow for the restore of a network connection without informing the Layer 3 protocol?
Question 3
DRAG DROP
Drag and drop the NETCONF layers on the left onto their appropriate description on the left.
Solution:
Does this meet the goal?
Drag and drop the NETCONF layers on the left onto their appropriate description on the left.
Solution:
Does this meet the goal?
Question 4
A data center provider has designed a network using these requirements
Two data center sites are connected to the public internet
Both data centers are connected to different Internet providers
Both data centers are also directly connected with a private connection for the internal traffic can also be at this direct connection The data center provider has only /19 public IP address block
Under normal conditions, Internet traffic should be routed directly to the data center where the services are located. When one Internet connections fails to complete traffic for both data centers should be routed by using the remaining Internet connection in which two ways can this routing be achieved? (Choose two)
Two data center sites are connected to the public internet
Both data centers are connected to different Internet providers
Both data centers are also directly connected with a private connection for the internal traffic can also be at this direct connection The data center provider has only /19 public IP address block
Under normal conditions, Internet traffic should be routed directly to the data center where the services are located. When one Internet connections fails to complete traffic for both data centers should be routed by using the remaining Internet connection in which two ways can this routing be achieved? (Choose two)
Question 5
Which MPLS attribute is required for links to carry a given MPLSTE tunnel?
Question 6
How can EIGRP topologies be designed to converge as fast as possible in the event of a point-to-
point link failure?
point link failure?
Question 7
Which two OSPF network type combinations can you use in the design that requires spoke-to-spoke
direct traffic? (Choose two.)
direct traffic? (Choose two.)
Question 8
Refer to the exhibit,
Which two design considerations should be implemented on the pseudowire between N-PE and U-
PE routers for a loop-free hierarchical VPLS service? (Choose two)
Which two design considerations should be implemented on the pseudowire between N-PE and U-
PE routers for a loop-free hierarchical VPLS service? (Choose two)
Question 9
Which three options are important design functions of IPv6 first-hop security? (Choose three)
Question 10
Which option describes a design benefit of root guard?
Question 11
Which technology , implemented on aggregation –edge nodes at the aggregation layer, provides per
–tenant isolation at Layer 3 , with separate dedicated per-tenant routing and forwarding tables on the inside interfaces of firewall contexts?
–tenant isolation at Layer 3 , with separate dedicated per-tenant routing and forwarding tables on the inside interfaces of firewall contexts?
Question 12
You are designing an IPv4 any source multicast redundancy solution. Which technology ensures the
quickest RP convergence?
quickest RP convergence?
Question 13
DRAG DROP
Solution:
Does this meet the goal?
Solution:
Does this meet the goal?
Question 14
Your client is considering acquiring a new IPv6 address block so that all Ethernet interfaces on the network receive addresses based on their burned-in hardware addresses, with support for 600 VLANs. Which action do you recommend?
Question 15
Which option is a critical mechanism to optimize convergence speed when using MPLS FRR?
Question 16
You are reviewing a new data center design for a customer. They chose to leverage a tunnel-based overlay technology for quick deployment and multitenant security. Which design concern can affect the availability across the data center?
Question 17
Refer to the exhibit.
As part of your design to monitor reachable services, a route health injector has just been deployed on the network. The route health injector injects /32 host routes into BGP with the next hop of 192.18.0.2, but the /32 routes are not being installed into the RIB or FIB of Router
As part of your design to monitor reachable services, a route health injector has just been deployed on the network. The route health injector injects /32 host routes into BGP with the next hop of 192.18.0.2, but the /32 routes are not being installed into the RIB or FIB of Router
Question 18
What is an advantage of placing the IS-IS flooding domain boundary at the core Layer in a three-layer
hierarchical network?
hierarchical network?
Question 19
Refer to the exhibit
company xyz has 150 branch location across the U.S. Each branch is connected to two aggregation router one router in each data center The network is configured with Multiple OSPF with multiple OSPF areas and the aggregation router are ABRs A requirement is to keep an optimal path to the data centers and at the same time reduce the LSA propagation and SPF recomputation during a change in any part of the network
Which design elements should be included on the aggregation router?
company xyz has 150 branch location across the U.S. Each branch is connected to two aggregation router one router in each data center The network is configured with Multiple OSPF with multiple OSPF areas and the aggregation router are ABRs A requirement is to keep an optimal path to the data centers and at the same time reduce the LSA propagation and SPF recomputation during a change in any part of the network
Which design elements should be included on the aggregation router?
Question 20
Which statement about SDN framework environment is true?
Question 21
Which are two data plane hardening techniques? (Choose two)
Question 22
Which two conditions are required for successful route aggregation? (Choose two)
Question 23
A large enterprise network has two data centers and a WLAN edge with a large hub-and spoke
network. The complete network is configured as a single OSPF area, and spoke routers are connected to unreliable WAN links. Which two changes should you make to deploy LSA on the spoke routers? (Choose two)
network. The complete network is configured as a single OSPF area, and spoke routers are connected to unreliable WAN links. Which two changes should you make to deploy LSA on the spoke routers? (Choose two)