20 September, 2021

A Review Of Certified 350-601 Practice Test

Examcollection 350-601 Questions are updated and all 350-601 answers are verified by experts. Once you have completely prepared with our 350-601 exam prep kits you will be ready for the real 350-601 exam without a problem. We have Up to date Cisco 350-601 dumps study guide. PASSED 350-601 First attempt! Here What I Did.

Cisco 350-601 Free Dumps Questions Online, Read and Test Now.

Page: 1 / 0

Total 0 questions Full Exam Access

Question 1

The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two SPAN characteristics must be considered? (Choose two.)

SPAN source ports can be monitored in multiple SPAN sessions.

The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.

A SPAN source port cannot be a destination SPAN port.

Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports.

The rx/tx option is available for VLAN or VSAN SPAN sessions.

Question 2

DRAG DROP
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the left into the correct order on the right.
Select and Place:
350-601 dumps exhibit

Solution:
350-601 dumps exhibit

Does this meet the goal?

Yes

Question 3

Which two hypervisors does Cisco HyperFlex support? (Choose two.)

OpenStack

Citrix XenServer

VMware vSphere

RedHat KVM

Microsoft Hyper-V

Question 4

Refer to the exhibit.
350-601 dumps exhibit

What is the result of implementing this configuration?

The Fibre Channel interface is configured for SPAN.

The Fibre Channel interface is configured for source distribution.

The Fibre Channel interlace is configured for FSPF.

The Fibre Channel interface is configured for synchronization distribution.

Question 5

When the default firmware package is set to a new version, which type of policy determines the liming of server reboots during the firmware upgrade?

diagnostics

maintenance

local disk

BIOS

Question 6

An engineer is implementing FCoE.
Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?

It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface.

It uses the Cisco Fabric Services protocol to exchange parameters between two peer links.

It provides the authentication of peers on the Cisco Nexus switch.

It always is enabled on 10/100-Mbps native Ethernet ports.

Question 7

A customer has a requirement to deploy a cloud service and needs to have full control over the underlying OS, data and applications.
Which cloud model meets this requirement?

MaaS

PaaS

SaaS

IaaS

Question 8

In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two.)

frames that were sent with high credit

frames that were sent on the link but not yet received

frames that were processed and transmitted by the transmitter after the PAUSE frame left the sender

frames that were processed and transmitted by the transmitter before the PAUSE frame left the sender

frames that were sent on the link and received

Question 9

APIC EPG Resolution Immediacy is set to "Immediate".
Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?

If "On demand" is selected, the policy is programmed in the hardware only when the first packet is received through the data path.

It "Immediate" is selected, the policy is programmed in the hardware as soon as the leaf is booted.

The "Immediate" and "On demand" options require a port group to be created on the VDS.

If "On demand" is selected, the policy is programmed in the hardware only when the APIC detects a VM created in the EPG.

Question 10

An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch.
Which action must be taken?

NPIV must be enabled on the upstream switch.

The FCNS database must be disabled in the fabric.

A port channel must be configured to the upstream switch.

All switches in the fabric must be Cisco MDS switches.

Question 11

Host1 is in VLAN100 located in DataCenter1 and Host2 is in VLAN200 located in DataCenter2.
Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?

Question 12

A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state. Which open-source tool meets this requirement?

SaltStack

Kubernetes

Puppet

Terraform

Question 13

Which statement about monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect is true?

Fibre Channel traffic can be monitored only on one vHBA per server.

Fibre Channel traffic can be monitored as it is encapsulated as FCoE.

The monitoring of Fibre Channel traffic is limited to the default VSAN.

The destination port for monitoring must be an unassigned Fibre Channel port.

Question 14

Which two statements about the process at upgrading an EPLD on a Cisco MDS 9000 Series Switch are correct? (Choose two.)

EPLDs can be upgraded only to the latest EPLD image.

EPLD upgrades can be completed without powering down the module during the upgrade.

An upgrade verification identifies the impact of each EPLD upgrade.

The EPLDs for all the modules on a switch must be upgraded at the same time.

EPLDs can be upgraded without replacing the hardware.

Question 15

A network architect is asked to design and manage geographically distributed data centers across cities and decides to use a Multi-Site Orchestrator deployment. How many orchestrators should be deployed?

Question 16

Which two statements about the process of performing an EPLD upgrade on a Cisco MDS 9000 Series Switch are true? (Choose two.)

The upgrade can be performed from the standby supervisor module.

The upgrade process disrupts only the module that is being upgraded.

The active supervisor can be upgraded.

If an upgrade is interrupted, the upgrade continues after a connection is restored.

Modules must be online to be upgraded.

Question 17

Refer to the exhibit.
350-601 dumps exhibit

Which statement about the default gateway configuration of the vPC is true?

Either switch can act as the active default gateway.

N7K-1 acts as the default gateway for all traffic.

N7K-2 forwards traffic that is destined for the default gateway by using the peer link.

N7K-2 acts as the default gateway for all traffic.

Question 18

A small remote office is set to connect to the regional hub site via NSSA ASBR.
Which type of LSA is sent to the remote office OSPF area?

type 7 LSA

type 1 LSA

type 5 LSA

type 3 LSA

Page: 1 / 0

Total 0 questions Full Exam Access