17 January, 2020

Actual IBM 1Y0-204 Braindump

Actual of 1Y0-204 exams materials and rapidshare for IBM certification for candidates, Real Success Guaranteed with Updated 1Y0-204 pdf dumps vce Materials. 100% PASS Citrix Virtual Apps and Desktops 7 Administration exam Today!

Page: 1 / 5

Total 65 questions Full Exam Access

Question 1

Which scenario will cause automatic high availability (HA) synchronization to fail?

Manually forced synchronization

A configuration change to the primary Citrix ADC

Different build versions

A force failover

Question 2

Scenario: A Citrix Administrator has executed the following command:
set httpcallout httpcallout1 –cacheForSecs 120
What will be the effect of this command?

The cache duration of the HTTP request is set to 120 seconds.

The cache duration of the HTTP callout request is set to 120 seconds.

The cache duration of the HTTP response is set to 120 seconds.

The cache duration of the HTTP callout response is set to 120 seconds.

Question 3

Scenario: A Citrix Administrator is enabling TLS Secure connections between the Cloud Connectors and on-premises StoreFront. After configuring the TLS certificate on all Cloud Connectors and disabling HTTP connections, the administrator finds that no resources are being enumerated.
Which extra step does the administrator need to take to allow enumeration to work between on-premises StoreFront and Citrix Cloud?

Configure Internet Information Services (IIS) on the StoreFront server to use HTTPS.

Change transport type to HTTPS in the StoreFront store DDC list.

Configure Cloud Connectors to allow unsecured connections.

Install Internet Information Services (IIS) on the Cloud Connector.

Question 4

After creating a new machine catalog using the Machine Creation Services (MCS) wizard in Citrix Studio, a Citrix Administrator determines that Windows activation fails for all new machines in that catalog.
Which two conditions can cause this to happen? (Choose two.)

The base image rearm count has been exceeded.

The Microsoft License Server is unreachable.

The version of Windows installed uses Multiple Activation Key (MAK) licensing.

The version of Windows installed is Windows Server 2012 R2.

Question 5

When creating a new Delegated Administrator with a custom scope, a Citrix Administrator notices that the Full Administrator role is NOT available.
The administrator is experiencing this behavior because the custom scope . (Choose the correct option to complete the sentence.)

created did NOT contain all the required objects

must use the Read Only role

was created with the hosting object selected

cannot use the Full Administrator role

Question 6

Scenario: A Citrix Administrator has enabled an HDX Session printers policy within a Citrix Virtual Apps and Desktops Site. The administrator added a printer to a print server and assigned the printer to all users through a session printer policy. In addition, several local client printers are auto-created within HDX sessions. No other printing policies are configured.
How will print jobs be routed when users send print jobs to a printer managed by the print server?

Directly to the network print server and then to the specified printer.

Over the HDX virtual channel to the specified printer attached to the print server.

Directly from the session Virtual Delivery Agent (VDA) machine to the printer.

Over the HDX virtual channel, through the endpoint, and then to the print server.

Question 7

Scenario: A Citrix Administrator needs to deploy Citrix Virtual Apps Project requirements dictate that management and maintenance should be minimized for the administrator, while still maintaining control of the Virtual Delivery Agent (VDA) machines.
Which hosting platform should the administrator choose to meet these requirements?

Service provider

On-premises

Public Cloud-hosted

Citrix Cloud

Question 8

How can a Citrix Administrator enable the ability to monitor application failures for Desktop OS machines running the Virtual Delivery Agent (VDA)?

By installing an Application Probe Agent on the Desktop OS VDA machines

By entering a PowerShell command on a Delivery Controller

By upgrading to premium licenses

By configuring a Citrix policy

Question 9

Scenario: A Citrix Administrator is configuring a Citrix ADC high availability (HA) pair with an existing Primary Citrix ADC with all resources configured. The administrator added the Secondary Citrix ADC in high availability and found that the configuration on the existing primary was removed. It is now the Secondary Citrix ADC in the HA pair.
Which two configurations could the administrator have made to prevent this from happening? (Choose two.)

Enable HA monitoring on all the interfaces of the SECONDARY device.

Set the Secondary Citrix ADC to STAY SECONDARY in the Configure HA Node settings.

Set the Primary Citrix ADC to STAY PRIMARY in the Configure HA Node settings.

Enable HA monitoring on all the interfaces of the PRIMARY device.

Question 10

Scenario: A Citrix Administrator wants to add machines to a Delivery Group. The administrator has two machine catalogs containing unallocated machines. On the screen to choose machines from machine catalogs, the administrator can see that only one machine catalog is available.
A possible cause of this issue is that the machines in the unavailable machine catalog are . (Choose the correct option to complete the sentence.)

different OS types

provisioned with another provisioning method

unregistered

turned off

Question 11

Scenario: A Citrix Administrator is managing a Citrix ADC SDX running eight Citrix ADC instances. The administrator first needs to upgrade the firmware on the instances. However; the administrator is concerned that it needs to be done all at once.
What upgrading flexibility does SDX provide in this scenario?

The Citrix ADC instances have to be upgraded at the same time.

It is NOT possible to upgrade the Citrix ADC instances to different firmware versions.

The Citrix ADC instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.

The Citrix ADC instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.

Question 12

Scenario: A Citrix Administrator has configured a Citrix ADC active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table.
What can the administrator configure to resolve this issue?

Virtual MAC

Independent Network Configuration (INC) mode

Route Monitor

HA monitor

Question 13

Which qualifier is used to configure the Content filter action to modify the HTTP header of an HTTP Request?

Corrupt

Forward

Add

Error Code

Question 14

Scenario: A Citrix Administrator has made changes to the Citrix ADC, deleting parts of the configuration, and then saved the new configurations. The changes caused an outage which needs to be resolved as quickly as possible. There is no Citrix ADC backup.
What does the administrator need to do to recover the configuration quickly?

Restore from revision history.

Restart the Citrix ADC.

Run HA file synchronization.

Run Save v/s Running configuration.

Question 15

A Citrix Administrator is configuring a Citrix ADC high availability (HA) pair and needs to ensure that one Citrix ADC is UP and primary at all times to ensure the business websites are always available.
What does the administrator need to do to ensure that the Citrix ADCs still handle web traffic in the event that both nodes become unavailable or fail a health check?

Disable HA Fail-safe mode on the Primary Citrix ADC only.

Configure HA Fail-safe mode on each Citrix ADC independently.

Configure HA Fail-safe mode on the Primary Citrix ADC only.

Disable HA Fail-safe mode on the Secondary Citrix ADC.

Question 16

Scenario: A Citrix Administrator configures the 'Auto connect client drives' user settings to map client drives within the HDX session for all published desktops. The setting is configured in a Baseline Group Policy Object (GPO) and linked to an Organizational Unit (OU) that contains all of the published desktops.
When a user launches the desktop, client drives are NOT mapped. What is a possible reason?

gpupdate /force needs to be executed on all of the machines.

Loopback processing is NOT enabled.

The GPO needs to be linked to the User OU.

Desktops need to be restarted for the policy to be applied.

Question 17

Scenario: A Citrix Administrator has received complaints from published application users. They report that it takes a long time to relaunch an application after they close it by mistake.
The administrator needs a solution that will reduce application launch times in these situations. Which feature should the administrator enable?

Session Sharing

Session Reliability

Application Lingering

Application Prelaunch

Question 18

Scenario: A Citrix Administrator needs to deploy 300 virtual Windows 10 desktops in an environment. The deployment should have a low impact on the existing network infrastructure. The environment also requires user-installed applications and persistency.
Which Citrix technology can the administrator use to provision the desktops?

Citrix Provisioning

Existing Machines

Machine Creation Services

Manual Provisioning

Question 19

Which step can a Citrix Administrator take in order to use the default compression policies?

Bind the default compression policies to the virtual server.

Enable compression on the associated bound services.

Disable the Citrix ADC Compression feature at a global level.

Select the compression algorithm (gzip/deflate/identity).

Question 20

Scenario: A Citrix Administrator configured the “-denySSLReneg” Parametetr using the below command on Citrix ADC to enhance security.
set ssl parameter –denySSLReneg

NONSECURE

HIGHSECURE

FRONTEND_CLIENT

ALL

Question 21

Scenario: A Citrix Administrator received reports from users regarding published applications freezing and crashing randomly within their Virtual Delivery Agent (VDA) machine sessions. The administrator would like to review the history of applications that have crashed recently.
Which step can the administrator take to gather the necessary information from within Citrix Director?

Review Failed Server OS Machines under Dashboard.

Configure Application Faults under Trends.

Configure Application Errors under Trends.

Review Citrix Alerts under Alerts.

Page: 1 / 5

Total 65 questions Full Exam Access