All About Accurate 3V0-42.20 Questions Pool

Master the 3V0-42.20 Advanced Design VMware NSX-T Data Center content and be ready for exam day success quickly with this Pass4sure 3V0-42.20 practice exam. We guarantee it!We make it a reality and give you real 3V0-42.20 questions in our VMware 3V0-42.20 braindumps.Latest 100% VALID VMware 3V0-42.20 Exam Questions Dumps at below page. You can use our VMware 3V0-42.20 braindumps and pass your exam.

Also have 3V0-42.20 free dumps questions for you:

Page: 1 / 4
Total 57 questions Full Exam Access
Question 1
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop about ESXi Host networking:
3V0-42.20 dumps exhibit A total of 50 ESXi hosts to be configured as Transport Nodes.
3V0-42.20 dumps exhibit All ESXi hosts have a dedicated 2 ?? Intel 10Gbps Physical Network adapter for the Overlay Traffic. To achieve low latency, high throughput, redundancy, and performance, which two NIC teaming policies
should the architect recommend? (Choose two.)
My answer: -
Reference answer: DE
Reference analysis:

None

Question 2
An administrator is asked to improve Recovery Point Objective (RPO) and Recovery Time Objective (RTO) for Disaster Recovery (DR) in their company network. The network has a primary site and a secondary site. The ability to support outages with minimum loss of connectivity to the company??s core application is a priority.
Which design should the administrator recommend? (Choose the best answer.)
My answer: -
Reference answer: B
Reference analysis:

None

Question 3
A Solutions Architect is designing an environment with 1,200 services being offered through the NSX-T Data Center Load Balancer.
Which three selections are necessary to meet the minimum requirements to support the solution? (Choose three.)
My answer: -
Reference answer: BDF
Reference analysis:

None

Question 4
A telecom company has purchased NSX-T as part of a Software Defined Data Center (SDDC) initiative. The company wants to ensure the highest performance for network traffic leaving the virtual environment.
My answer: -
Reference answer: BE
Reference analysis:

None

Question 5
Which NSX-T feature is used to allocate the network bandwidth to business-critical applications and to resolve situations where several types of traffic compete for common resources? (Choose the best answer.)
My answer: -
Reference answer: A
Reference analysis:

None

Question 6
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit There isn??t much budget available for a new off shore site.
3V0-42.20 dumps exhibit The new site is decentralized and no communication with the main data center is required.
3V0-42.20 dumps exhibit The design will need to cater for availability, upgrades, and failure scenarios.
3V0-42.20 dumps exhibit N+1 must be maintained at all times.
Which three selections should the architect recommend in their design? (Choose three.)
My answer: -
Reference answer: ABC
Reference analysis:

None

Question 7
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. Which two statements should the architect consider as non-technical requirements? (Choose two.)
My answer: -
Reference answer: BD
Reference analysis:

None

Question 8
Refer to the exhibit.
3V0-42.20 dumps exhibit
A financial company is adopting micro-services with the intent of simplifying network security. An NSX-T architect is proposing a NSX-T Data Center micro-segmentation logical design. The architect has created a diagram to share with the customer.
How many security levels will be implemented according to this Logical Design? (Choose the best answer.)
My answer: -
Reference answer: A
Reference analysis:

None

Question 9
What would an architect recommend to a customer that wants to extend management to an additional data center through Layer 2, but does not want to add additional NSX-T licensing? (Choose the best answer.)
My answer: -
Reference answer: D
Reference analysis:

None

Question 10
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop:
3V0-42.20 dumps exhibit Some workloads should be moved to a Cloud Provider.
3V0-42.20 dumps exhibit Extend network??s VLAN or VNI across sites on the same broadcast domain.
3V0-42.20 dumps exhibitSupport 1500 byte MTU between sites.
Which selection should the architect include in their design? (Choose the best answer.)
My answer: -
Reference answer: D
Reference analysis:

None

Question 11
An NSX-T architect is working with a customer who wants to improve performance and future-proof their workloads with a multi-site architecture.
A current-state analysis captured this information:
3V0-42.20 dumps exhibit Latency between sites is 160ms.
3V0-42.20 dumps exhibit Bandwidth is 2Gbps.
3V0-42.20 dumps exhibit The MTU is 1600.
What two VMware design recommendations should the architect recommend to the organization to achieve future-proofing? (Choose two.)
My answer: -
Reference answer: AE
Reference analysis:

None

Question 12
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop:
3V0-42.20 dumps exhibit The company will use a Leaf and Spine physical network architecture with Layer 3 gateways for top of rack switches.
3V0-42.20 dumps exhibit The company is planning to deploy 120 ESX hosts across 10 racks.
3V0-42.20 dumps exhibit There will be a total of a 12 clusters where each cluster has one host per rack.
What should the architect recommend to allow applications to run on any host in the cluster? (Choose the best answer.)
My answer: -
Reference answer: D
Reference analysis:

None

Question 13
Which two protocols are typically used for multicast in a NSX-T Data Center environment? (Choose two.)
My answer: -
Reference answer: CD
Reference analysis:

None

Question 14
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop:
3V0-42.20 dumps exhibit Migrating existing data center to KVM hosts.
3V0-42.20 dumps exhibit Redundancy and high availability are required.
3V0-42.20 dumps exhibit No component can be a single point of failure.
Which selection should the architect recommend? (Choose the best answer.)
My answer: -
Reference answer: C
Reference analysis:

None

Question 15
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit Customer is concerned with NSX Manager availability.
3V0-42.20 dumps exhibit 3 cabinets/racks are available in the data center.
3V0-42.20 dumps exhibit No integration with 3rd party solution is required.
3V0-42.20 dumps exhibit There is no budget for physical equipment acquisition.
3V0-42.20 dumps exhibit The 3 cabinets/racks do not share the same L2 domain.
Which three selections should the architect include in their design to address the customer??s concern with NSX Manager availability? (Choose three.)
My answer: -
Reference answer: ADE
Reference analysis:

None

Question 16
A Solutions Architect is assisting a service provider with designing an NSX-T Data Center solution for these environments:
Virtual Data Center to Virtual Data Center connectivity Tenant workload on-boarding to Virtual Data Centers. These requirements must be met:
3V0-42.20 dumps exhibit scalability across 5 data centers
3V0-42.20 dumps exhibit all sites have a latency of 180ms
3V0-42.20 dumps exhibit MTU between sites is 1800
3V0-42.20 dumps exhibit bandwidth is 100Mbps between sites
3V0-42.20 dumps exhibit multi-tenancy
Which two selections should the Solutions Architect propose to the service provider? (Choose two.)
My answer: -
Reference answer: DE
Reference analysis:

None

Question 17
Which two resources can be used by an NSX architect during the Assessment Phase? (Choose two.)
My answer: -
Reference answer: AE
Reference analysis:

None

Question 18
Which two benefits can be achieved using in-band management of an NSX Bare Metal Edge Node? (Choose two.)
My answer: -
Reference answer: BD
Reference analysis:

None

Question 19
Which three assessment findings are part of a Conceptual Design? (Choose three.)
My answer: -
Reference answer: ACD
Reference analysis:

None

Question 20
What selection is the key design benefit provided by a dedicated Edge Cluster VM or Bare Metal? (Choose the best answer.)
My answer: -
Reference answer: B
Reference analysis:

None

Question 21
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop:
3V0-42.20 dumps exhibit Current hypervisor of choice is KVM.
3V0-42.20 dumps exhibit Cost reduction is important.
Which two selections should the architect recommend to the organization? (Choose two.)
My answer: -
Reference answer: CD
Reference analysis:

None

Page: 1 / 4
Total 57 questions Full Exam Access