04 January, 2021
Avant-garde CSSBB Answers For Certified Six Sigma Black Belt Certification
Act now and download your ASQ CSSBB test today! Do not waste time for the worthless ASQ CSSBB tutorials. Download Most up-to-date ASQ Certified Six Sigma Black Belt exam with real questions and answers and begin to learn ASQ CSSBB with a classic professional.
Free demo questions for ASQ CSSBB Exam Dumps Below:
Question 1
- (Topic 2)
A set of data from a process has 8 readings per sample and 50 samples. The mean of the 50 sample means is 12.62. The mean of the 50 ranges is 0.18.A customer requires that SPC charts be done on their forms which have spaces for only 5 readings per sample. In preparation for calculating the new control limits the following question is asked, “Will the new average range be larger or smaller than the current average range?”. The answer is:
A set of data from a process has 8 readings per sample and 50 samples. The mean of the 50 sample means is 12.62. The mean of the 50 ranges is 0.18.A customer requires that SPC charts be done on their forms which have spaces for only 5 readings per sample. In preparation for calculating the new control limits the following question is asked, “Will the new average range be larger or smaller than the current average range?”. The answer is:
Question 2
- (Topic 1)
George is an employee of Black, Inc. John is George’s internal customer. Which statement is true?
George is an employee of Black, Inc. John is George’s internal customer. Which statement is true?
Question 3
- (Topic 2)
Approximately what percent of the data values are smaller than the mean?
Approximately what percent of the data values are smaller than the mean?
Question 4
- (Topic 1)
According to the Central Limit Theorem:
According to the Central Limit Theorem:
Question 5
- (Topic 1)
= 0.05 In problem 1, do the data indicate that the population for machine A has a larger standard deviation?
= 0.05 In problem 1, do the data indicate that the population for machine A has a larger standard deviation?
Question 6
- (Topic 2)
This QFD matrix was used in the design process for a ball point pen. What symbol is appropriate for the square labeled 8?
A.
B.
C.
This QFD matrix was used in the design process for a ball point pen. What symbol is appropriate for the square labeled 8?
A.
B.
C.
Question 7
- (Topic 1)
A random sample of 2500 printed brochures is found to have a total of three ink splotches. The rate of ink splotches in PPM is:
A random sample of 2500 printed brochures is found to have a total of three ink splotches. The rate of ink splotches in PPM is:
Question 8
- (Topic 2)
Quality Function Deployment is a tool to aid in:
Quality Function Deployment is a tool to aid in:
Question 9
- (Topic 2)
This QFD matrix was used in the design process for a ball point pen. What symbol is appropriate for the square labeled 11?
A.
B.
C.
This QFD matrix was used in the design process for a ball point pen. What symbol is appropriate for the square labeled 11?
A.
B.
C.
Question 10
- (Topic 1)
Find the value of (8) in the ANOVA table. Assume:
Find the value of (8) in the ANOVA table. Assume:
Question 11
- (Topic 1)
Customer requirement #3 has a _______ relationship with technical feature #3.
Customer requirement #3 has a _______ relationship with technical feature #3.
Question 12
- (Topic 1)
A quality engineer employed by a hospital is asked to improve the process of medication storage in locked cabinets near patient doors. One defect that occurs rarely is that the medication caddy is left out when the cabinet is relocked. The engineer installs a gravity activated arm that will not permit the door to close when the caddy isn’t inside. This improvement is best described by which approach to problem solving?
A quality engineer employed by a hospital is asked to improve the process of medication storage in locked cabinets near patient doors. One defect that occurs rarely is that the medication caddy is left out when the cabinet is relocked. The engineer installs a gravity activated arm that will not permit the door to close when the caddy isn’t inside. This improvement is best described by which approach to problem solving?
Question 13
- (Topic 2)
There have been some instances in which 1.5 inch sheet metal screws are used where 1.25 inch should have been used. This produces a critical defect. The decision is made to have all 1.25 inch screws have a square reduced head and all 1.5 inch screws be Phillips. This is an example of:
There have been some instances in which 1.5 inch sheet metal screws are used where 1.25 inch should have been used. This produces a critical defect. The decision is made to have all 1.25 inch screws have a square reduced head and all 1.5 inch screws be Phillips. This is an example of:
Question 14
- (Topic 1)
Is it safe to assume that the interaction effects are negligible?
Is it safe to assume that the interaction effects are negligible?
Question 15
- (Topic 1)
A population of size 1,000,000 has mean 42 and standard deviation 6. Sixty random samples, each of size 15 are selected. According to the Central Limit Theorem the distribution of the sixty sample means has a mean of approximately:
A population of size 1,000,000 has mean 42 and standard deviation 6. Sixty random samples, each of size 15 are selected. According to the Central Limit Theorem the distribution of the sixty sample means has a mean of approximately:
Question 16
- (Topic 1)
If the probability that event A occurs is .51, the probability that event B occurs is .64 and events A and B are statistically independent then:
If the probability that event A occurs is .51, the probability that event B occurs is .64 and events A and B are statistically independent then:
Question 17
- (Topic 2)
Find the upper control limit for a range chart if n = 4 and the average range is 2.282.
Find the upper control limit for a range chart if n = 4 and the average range is 2.282.
Question 18
- (Topic 2)
A process using a p-chart has pbar = 0.076 and nbar = 4.86. Find the control limits.
A process using a p-chart has pbar = 0.076 and nbar = 4.86. Find the control limits.
Question 19
- (Topic 2)
Work performed by the payroll department is considered value added activity.
Work performed by the payroll department is considered value added activity.
Question 20
- (Topic 2)
When Tricia empties a box of capacitors she places it at a designated spot on her work table. Sam notices the empty box and brings a full box of capacitors from the stock room. This is an example of:
When Tricia empties a box of capacitors she places it at a designated spot on her work table. Sam notices the empty box and brings a full box of capacitors from the stock room. This is an example of:
Question 21
- (Topic 2)
One of the approaches used by TRIZ is referred to as “removing the contradiction.” A project team is asked to determine how many coats of paint should be applied to a panel. In this case the contradiction is:
One of the approaches used by TRIZ is referred to as “removing the contradiction.” A project team is asked to determine how many coats of paint should be applied to a panel. In this case the contradiction is: