18 February, 2020

Designing Cisco Wireless Enterprise Networks 300-360 Interactive Bootcamp

Best Quality of 300-360 exam answers materials and keys for Cisco certification for client, Real Success Guaranteed with Updated 300-360 pdf dumps vce Materials. 100% PASS Designing Cisco Wireless Enterprise Networks exam Today!

Free 300-360 Demo Online For Cisco Certifitcation:

Page: 1 / 16

Total 192 questions Full Exam Access

Question 1

Drag from the left the acceptable minimum cell overlap for data and voice cells for site survey and deployment
300-360 dumps exhibit

Solution:

17MHZ Voice 30MHZ DATA

Does this meet the goal?

Yes

Question 2

A wireless phone user is having roaming difficulties and is experiencing gaps in the conversation while roaming.
WLC WLAN is configured as IEEE 802.1X and WPA2 and Aironet information element. What should be configured to fix the problem?

IEEE 802.1X with Cisco Centralized Key Management

IEEE 802.1X EAP-FAST

DHCP required and DHCP proxy on WLC

WPA1 and PSK

Question 3

Clients are experiencing artifacts in multicast video even though the network was recently upgraded to 802.11n APs. What three configuration changes will be most effective to improve performance? (Choose three.)

increase mandatory data rate

enable 40 MHz wide channels

enable Call Admission Control

increase QoS marking on multicast

enable VideoStream

disable Multicast Messaging

Question 4

Which three things do you need to consider prior to performing a wireless site survey? (Choose three.)

The time required to acquire any additional infrastructure components.

The time required to survey each potential AP location.

The time required to assess application server locations at the customer facility.

The type of wireless survey tools required to perform the site survey.

The time required to assess customer WLAN density and throughput requirements.

The time required to utilize the design mode in Cisco WCS to prepare a preliminary WLAN design to reduce on-site survey time.

Question 5

Which option is an enhancement of enabling WMM on an AP?

All access classes use the same IEEE 802.11 sequence number.

It disables U-APSD Power Save.

Each access class has its own IEEE 802.11 sequence number.

CAC is reserved for voice calls only.

Question 6

An engineer is preparing for an outdoor wireless survey to mesh connect a distant remote building to a connected building. Which two types of antennas are appropriate for this application? (Choose two.)

circular polarized

patch

dish

Yagi

omni

Question 7

The ClO of a company wants to start tracking inventory in the warehouse using RFID tags and their existing wireless network.
The company hires a wireless engineer to ensure that their existing network can support this new initiative.
Which tool in Cisco Prime can help the wireless engineer?

Planning Mode

Map Editor

Site Survey

Location Readiness

Question 8

You are using Ekahau to plan a wireless network. Which unit of measurement is used by RF obstacles to show RF loss?

SNR

dBm

RSSI

Question 9

Which option is an advantage at using Cisco CleanAir technology in your wireless network?

CleanAir can be used on an AP in monitor mode so that the AP serves client traffic and monitors for interference simultaneously.

A single CleanAir AP can be used to analyze RF traffic from many APs

CleanAir is a software feature that can be added to arty AP to start monitoring interference and air quality.

CleanAir operates 24/7 and constantly monitors for interference and air quality issues.

Question 10

You must redesign an existing wireless network that spans multiple floors to support location-based services. Where do you install the access points?

in the elevators

in the perimeter of each floor

in the stairwells of each floor

in the center of each floor

Question 11

An engineer is performing a predictive RF design of a typical office environment. Which value is the most likely attenuation of a cubical wall for this environment?

2 dBi

12 dBd

1 dB

12 mW

Question 12

What is the Cisco-recommended cell overlap percentage for a typical RToWLAN network design?

5 to 10

at least 20

a maximum of 20

at least 50

Question 13

A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP, with high gain antennas for industrial, maintenance, or storage areas. When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several APs. Which option is the best to reduce the negative impact of the design?

Deploy the specified access points per area type.

Resurvey and adjust the design.

Increase the Tx power on incorrectly surveyed access points.

Deploy unsurveyed access points to the design.

Question 14

You must configure IPV6 to drop unwanted or rogue RA packets that come from wireless clients. Which feature do you enable?

DHCPv6 Server Guard

IPv6 Source Guard

RA throttling

RA guard

Question 15

A customer wants to upgrade their current wireless infrastructure to support wireless voice capabilities. When using a voice readiness assessment tool, the customer notes that multiple areas have failed to meet the requirements.
How should the customer resolve this issue?

Reduce the maximum threshold on the voice readiness tool to -67 dBm.

Perform a site survey to position access points in the facility?

Ensure that there is a 1 to 5 ratio of monitor mode to local mode access points

Increase the power on all the access points to 25mW or more.

Question 16

A customer is deploying a Greenfield 802.11ac network on a floor that will support approximately 300 wireless devices. Which setting needs to be changed on Prime Infrastructure Planning Tool in order to predict the amount of access points the customer needs to service the new floor?

Data Coverage Support Margin

Demand Settings

Add AP Field

802.11n Protocol Support

Question 17

Which two factors influence the density of APs in a data-only WLAN environment? (Choose two.)

the number of clients that will roam through the facility

the type of controller chosen

the defined coverage area and customer needs

the number of APs dedicated to voice services

channel reuse and WLAN bandwidth

Question 18

After implementing mesh with an IP surveillance camera connected to the LAN port on a RAP, the engineer notices that QoS is not being marked.
In this setup, what device is responsible for marking upstream traffic from the camera?

IP Camera

MAP

RAP

Wireless Controller

First-Hop Router

Question 19

When conducting a wireless survey at a customer facility, signal attenuation in an area that is surrounded by thick glass walls is noted as 2dB. When configuring Cisco Prime Infrastructure, which obstacle should be placed in a map editor to represent the impact the glass wall will have on the RF signal in the facility?

heavy door

thick wall

glass

light wall

Question 20

Which description of Cisco Centralized Key Management is true?

By caching their credentials, it helps clients save canning time when looking for a new AP to join.

It enable the controller to send directed roam requests to a client in situations when the controller can better service the client on a different AP than the one to which the client is associated.

It allows wireless clients to cache their credentials so that, while they are roaming, they do not need to re-authenticate to the wireless infrastructure.

It allow the wireless infrastructure to cache the credentials, which eliminates the need to conduct a full re-authentication when roaming.

Page: 1 / 16

Total 192 questions Full Exam Access