14 February, 2020
Guaranteed Cisco 200-355 Preparation Labs
Act now and download your Cisco 200-355 test today! Do not waste time for the worthless Cisco 200-355 tutorials. Download Renovate Cisco Implementing Cisco Wireless Network Fundamentals exam with real questions and answers and begin to learn Cisco 200-355 with a classic professional.
Online 200-355 free questions and answers of New Version:
Question 1
- (Exam Topic 3)
Refer to the exhibit. A wireless engineer has an antenna with the radiation pattern shown in the exhibit. What type of antenna is it?
Refer to the exhibit. A wireless engineer has an antenna with the radiation pattern shown in the exhibit. What type of antenna is it?
Question 2
- (Exam Topic 3)
A company has all IEEE 802.11a/802.11g devices; however, its network administrator recommends installing 802.11n access points to provide greater performance. Which feature on an 802.11n AP provides better performance to legacy devices?
A company has all IEEE 802.11a/802.11g devices; however, its network administrator recommends installing 802.11n access points to provide greater performance. Which feature on an 802.11n AP provides better performance to legacy devices?
Question 3
- (Exam Topic 3)
In what WCS menu would an engineer locate the WCS software version?
In what WCS menu would an engineer locate the WCS software version?
Question 4
- (Exam Topic 2)
Which CLI command is used on a Cisco WLC to troubleshoot mobility, rogue detection, and load-balancing events?
Which CLI command is used on a Cisco WLC to troubleshoot mobility, rogue detection, and load-balancing events?
Question 5
- (Exam Topic 3)
Refer to the exhibit. An engineer is testing client connectivity and is unable to transmit or receive at IEEE 802.11n high throughput rates. Which two Layer 2 security configurations allow the client to successfully
connect at 802.11n rates? (Choose two.)
Refer to the exhibit. An engineer is testing client connectivity and is unable to transmit or receive at IEEE 802.11n high throughput rates. Which two Layer 2 security configurations allow the client to successfully
connect at 802.11n rates? (Choose two.)
Question 6
- (Exam Topic 3)
On which two OSI layers does the IEEE focus in 802 standardization? (Choose two.)
On which two OSI layers does the IEEE focus in 802 standardization? (Choose two.)
Question 7
- (Exam Topic 3)
A user is unable to access a lobby administration web page when using a wireless laptop; however, the user can access the page with a wired desktop computer. Which management feature needs to be enabled on the WLC to allow laptop access?
A user is unable to access a lobby administration web page when using a wireless laptop; however, the user can access the page with a wired desktop computer. Which management feature needs to be enabled on the WLC to allow laptop access?
Question 8
- (Exam Topic 2)
Solution:
Does this meet the goal?
Solution:
Does this meet the goal?
Question 9
- (Exam Topic 3)
Which three parameters must be configured for local EAP-FAST on the controller? (Choose three.)
Which three parameters must be configured for local EAP-FAST on the controller? (Choose three.)
Question 10
- (Exam Topic 1)
Which three items are allowed on an Ethernet trunk port? (Choose three.)
Which three items are allowed on an Ethernet trunk port? (Choose three.)
Question 11
- (Exam Topic 1)
Which two actions are best for deploying VoWLAN on a wireless network? (Choose two.)
Which two actions are best for deploying VoWLAN on a wireless network? (Choose two.)
Question 12
- (Exam Topic 2)
What is the maximum number of access points supported on Cisco WCS with an enterprise license?
What is the maximum number of access points supported on Cisco WCS with an enterprise license?
Question 13
- (Exam Topic 4)
End-to-end encryption is a management requirement for a wireless deployment When importing the WLCs into CISCO Prime Infrastructure 2.0, which two options represent the version of SNMP and remote access parameter that fulfil this requirement?(Choose two)
End-to-end encryption is a management requirement for a wireless deployment When importing the WLCs into CISCO Prime Infrastructure 2.0, which two options represent the version of SNMP and remote access parameter that fulfil this requirement?(Choose two)
Question 14
- (Exam Topic 1)
What is the equivalent of 26 dBm in milliwatts?
What is the equivalent of 26 dBm in milliwatts?
Question 15
- (Exam Topic 4)
What is the maximum power level for AP in any not regularity domain?
What is the maximum power level for AP in any not regularity domain?
Question 16
- (Exam Topic 2)
Which four parameters must be configured for local EAP-FAST on the controller? (Choose four.)
Which four parameters must be configured for local EAP-FAST on the controller? (Choose four.)
Question 17
- (Exam Topic 3)
Which three access point modes service clients? (Choose three.)
Which three access point modes service clients? (Choose three.)
Question 18
- (Exam Topic 1)
An engineer is using a predictive survey tool to estimate placement of APs in a carpeted office space. Most interior walls should be assigned which attenuation value?
An engineer is using a predictive survey tool to estimate placement of APs in a carpeted office space. Most interior walls should be assigned which attenuation value?
Question 19
- (Exam Topic 1)
Which governing body analyzes the applications and environments in which wireless networks are used?
Which governing body analyzes the applications and environments in which wireless networks are used?
Question 20
- (Exam Topic 2)
Refer to the exhibit.
Which tab is used to set up web authentication for guest users?
Refer to the exhibit.
Which tab is used to set up web authentication for guest users?
Question 21
- (Exam Topic 1)
A network engineer notices that two mesh APs are having problems communicating. After reviewing the current radio configurations, it is noted that one AP is transmitting at 3 mW while the other is transmitting at 60 mW. How many decibels would the 3-mW AP need its power increased to match the 60-mW AP?
A network engineer notices that two mesh APs are having problems communicating. After reviewing the current radio configurations, it is noted that one AP is transmitting at 3 mW while the other is transmitting at 60 mW. How many decibels would the 3-mW AP need its power increased to match the 60-mW AP?
Question 22
- (Exam Topic 3)
Which two WLC debug commands are appropriate to troubleshoot a wireless client that is associated to an AP? (Choose two.)
Which two WLC debug commands are appropriate to troubleshoot a wireless client that is associated to an AP? (Choose two.)
Question 23
- (Exam Topic 2)
You are sitting in an airport preparing to use a free WLAN. When you look at the connections in your Windows 7 wireless client, you see a network name and three boxes with a yellow shield.
What does this mean?
You are sitting in an airport preparing to use a free WLAN. When you look at the connections in your Windows 7 wireless client, you see a network name and three boxes with a yellow shield.
What does this mean?
Question 24
- (Exam Topic 1)
Which two pieces of information are needed for the wireless client to connect to the wireless network? (Choose two.)
Which two pieces of information are needed for the wireless client to connect to the wireless network? (Choose two.)
Question 25
- (Exam Topic 3)
What is the channel width of an 802.11b wireless channel?
What is the channel width of an 802.11b wireless channel?
Question 26
- (Exam Topic 3)
Refer to the exhibit.
Given the WLC data rate configuration, a control frame is sent at which speed?
Refer to the exhibit.
Given the WLC data rate configuration, a control frame is sent at which speed?
Question 27
- (Exam Topic 3)
A wireless engineer is designing a network for the London branch of a company. Which 5-GHz band allows the branch to use the highest EIRP?
A wireless engineer is designing a network for the London branch of a company. Which 5-GHz band allows the branch to use the highest EIRP?
Question 28
- (Exam Topic 3)
A wireless client with ID28720486 is trying to connect to wireless network. What must be configured on the client side to connect to an infrastructure WLAN that broadcasts its SSID and uses WPA2 PSK?
A wireless client with ID28720486 is trying to connect to wireless network. What must be configured on the client side to connect to an infrastructure WLAN that broadcasts its SSID and uses WPA2 PSK?