29 March, 2023

How Many Questions Of 352-001 Practice Question

Master the 352-001 CCDE Written Exam content and be ready for exam day success quickly with this Actualtests 352-001 exam prep. We guarantee it!We make it a reality and give you real 352-001 questions in our Cisco 352-001 braindumps.Latest 100% VALID Cisco 352-001 Exam Questions Dumps at below page. You can use our Cisco 352-001 braindumps and pass your exam.

Check 352-001 free dumps before getting the full version:

Page: 1 / 20

Total 249 questions Full Exam Access

Question 1

What are two benefits of following a structured hierarchical and modular design? (Choose two.)

Each component can be designed independently for its role.

Each component can be managed independently based on its role.

Each component can be funded by different organizations based on its role.

Each component can support multiple roles based on the requirements.

Each component can provide redundancy for applications and services.

Question 2

Which two statements about AToM are true? (Choose two)

It encapsulates Layer 2 frames at the egress PE

When using AToM, the IP precedence filed is not copied to the MPLS packet

AToM supports connecting different L2 technologies using interworking option

The loopback address of the PE router must be either /24 or /32

It provides support for L2VPN features on ATM interfaces

Question 3

Which effect of designing a Layer 2 network using the PortFast fast feature with PVST+ is true?

It shuts down the port when receiving the superior BPDU

It accelerates the network convergence on the trunk uplinks

In combination with BPDU filtering, it causes the switch port to stay in the forwarding state

It moves the switch port directly to the forwarding state

Question 4

Refer to the exhibit.
352-001 dumps exhibit

Company A is running a single-area OSPF, and Company B is running RIP as the IGP with no overlapping IP address spaces. Company A has just acquired Company B and both networks must be merged. Which three design components are recommended to guarantee connectivity and redundancy between the two networks? (Choose three.)

Enable mutual redistribution between OSPF and RIP on one border router.

Enable mutual redistribution between OSPF and RIP on Router A and Router B using route tags.

Increase the administrative distance to 130 for the OSPF external prefixes on Router A and Router B.

Implement an ACL on Router A and Router B to prevent OSPF external routes from being installed in the OSPF database.

Filter external routes on Router A and Router B based on route tags.

Question 5

Refer to the exhibit.
352-001 dumps exhibit

This new OSPF network has four areas, but the hub-and-spoke area experiences frequent flapping. In
order to fix this design failure, which two mechanisms can you use to isolate the data center area from the hub-and-spoke area without losing Ip connectivity? (Choose two)

Use OSPF distribute-list filtering on router A

Deploy a prefix summarization on router D

Make the data center area a NSSA

Make the data center area totally stub

Convert the data center area to EIGRP protocol

Question 6

For a redesign requirement of the service provider network, summarization was implemented at multiple locations for each summary range. Now some customers of the service provider are complaining of higher latency and performance issues for a server hosted in the summarized are

Which design issues must be considered when creating the summarization?

Summarization adds CPU overhead on the routers sourcing the summarized advertisement.

Summarization prevents the visibility of the metric to the component subnets.

Summarization causes packet loss when RPF is enabled.

Summarization creates routing loops.

Question 7

After a large EIGRP network had automatic summarization enabled throughout, it started experiencing routing loops. Which action should you take to quickly resolve the routing loops yet to perform summarization?

Redistribute connected routes at major IP networks boundaries

Redesign the IP addressing scheme

Increase the AD of the automatically summarized routes

Replace the automatic summarization with more specific summary routes

Question 8

As network designer, which option is your main concern with regards to virtualizing multiple network
zones into a single hardware device?

Fate sharing

CPU resource allocation

Congestion control

Security

Bandwidth allocation

Question 9

When is it required to leak routes into an IS-IS level 1 area?

When MPLS L3VPN PE devices are configured in the level 1 areas

When unequal cost load balancing is required between the backbone and nonbackbone areas

When a multicast RP is configured in the nonbackbone area

When equal cost load balancing is required between the backbone and nonbackbone areas

Question 10

Refer to the exhibit.
352-001 dumps exhibit

As part of a redesign project, you must predict multicast behavior. What is the resultant multicast traffic receiving on the shared tree( , G), if it is received on the LHR interface indicated?

It is dropped due to an unsuccessful RPF check against the multicast receiver

It is switched due to a successful RPF check against the routing table

It is switched given that no RPF check is performed

It is dropped due to an unsuccessful RPF check against the multicast source

Question 11

A healthcare customer requested that health statistics from their infrastructure devices are to be sent over their service provider MPLS network. Which protocol must be enabled?

SNMPv3

Syslog TLS

syslog

SNMPv2

SSH

Question 12

DRAG DROP

Solution:
352-001 dumps exhibit

Does this meet the goal?

Yes

Question 13

On a large enterprise security solution, which two options are IDS or IPS modes of operation?
(Choose two)

Transparent mode

Routed mode

Inline mode

Traffic discovery mode

Promiscuous mode

Question 14

Refer to the exhibit.
352-001 dumps exhibit

This network is running IS-IS as the single routing protocol and the LSP and SPF timers are aggressively configured so the network converges in subsecond. The customer reports that router B had a memory crash and reloaded. Which resulted in some packets from the application being lost. The application servers are behind router G and the end users are behind router H, which design change should be made to prevent this packet-loss problem from reoccurring?

Use asymmetric carrier delay timer

Deploy all links as point-to-point

Redesign the network as a flat level 2

Optimize the LSP/SPF timers to send LSPs immediately after a topology change

Enable the advertisement of the overload bit for a specific amount of time after reload on router B

Question 15

Which two components are the responsibility of the customers in a platform as a Service offering?
(Choose two)

Applications

Infrastructure connectivity

Hardware

Data

APIs

Question 16

Which option is a benefit of using N-Port Virtualization?

reduces the amount of domain IDs that are used in the fabric

does not need to create zoning

reduces latency when using local switching on Fibre Channel ports

allows trunking to the upstream switch

does not need to configure the upstream switches

Question 17

A very large enterprise customer is migrating from EIGRP to IS-IS .What is your main concern in
regards to change in the path packets take after the migration is complete?

The areas sizes.

The number of prefixes

The redistribution points.

The bandwidth and metrics of the links.

Question 18

A network has several routers running IS-IS L1L2 mode on the same Ethernet segment. Which action
reduces to a minimum the number of IS-IS adjacencies in this segment?

Define only the router on the segment to be DIS

Change all routers connected to this segment to a single-level area

Make the interface priority on the backup DIS lower than the primary DIS

Change half the routers to be L1-only and other half to be L2-only on this segment

Question 19

An enterprise network has two core routers that connect to 200 distribution routers and uses full-
mesh iBGP peering between these routers as its routing method. The distribution routers are experiencing high CPU utilization due to the BGP process. Which design solution is the most effective?

Increase the memory on the distribution routers

Increase the memory on the core routers

Implement route reflectors on the two core routers

Increase bandwidth between the core routers

Implement eBGP between the core and distribution routers

Question 20

You are designing dual-homed active/active ISP connections from an enterprise customer for internet services, and you have recommended BGP between the customer and ISP. When three security mechanisms do you enable to secure the connection? (Choose three)

uRPF is strict mode

remote triggered black holes

IDS

GTSM

Routing protocol authentication

uRPF in loose mode

Question 21

Which option describes the fundamental design differences between an IP-based network design
and a SAN-based?

An IP-based design has redundant connectivity in the fabric and high amounts of east-west traffic, whereas a SAN-based design uses redundancy from a dual-attached host, which uses separate fabrics and has very little east-west traffic

An IP-based design has redundancy from the host and high amounts of east-west traffic, whereas a SAN-based design uses redundancy in the fabric and very little east-west traffic

An IP-based design has redundant connectivity in the fabric and high amounts of east-west traffic, whereas a SAN-based design uses zoning based redundancy which uses separate fabrics and has very little east-west traffic

An IP-based design has redundant connectivity in the fabric and very little east-west traffic, whereas a SAN-based design uses redundancy in the host, which uses separate fabrics and has high amounts of east-west traffic

Question 22

Which mechanism should be added to a network design to identify unidirectional Spanning Tree
Protocol failures through BPDU loss?

Root guard

BPDU guard

Loop guard

UDLD

Question 23

A regional ISP is running MPLS TE. These tunnels are configured manually using paths. Which
technology centralizes the traffic engineering decisions to reduce operational complexity?

BGP Link State

DiffServ-TE

TE autobandwidth

Shared Risk link Group

Page: 1 / 20

Total 249 questions Full Exam Access