17 July, 2024
How Many Questions Of HPE6-A47 Samples
Printable of HPE6-A47 dumps materials and practice exam for HP certification for consumer, Real Success Guaranteed with Updated HPE6-A47 pdf dumps vce Materials. 100% PASS Designing Aruba Solutions exam Today!
Question 1
An enterprise needs an upgrade to 802.11ac. Users run applications such as Web, email, voice, and video. The architect needs to conduct an active site survey to plan 802.11ac AP locations. The noise floor is about -90 dBm across the site.
Based on Aruba best practices, what is the minimum acceptable signal that the architect should look for to determine the test AP range?
Based on Aruba best practices, what is the minimum acceptable signal that the architect should look for to determine the test AP range?
Question 2
An architect needs to plan 802.11ac wireless deployment for an office environment with a mix of closed offices and cubicles. The coverage area is approximately 4,645 square meters (approximately 50,000 square feet) and has 350 users. The employees use the wireless network for typical office applications, such as email, Web, printing, and accessing shared files and datacenter services.
The architect plans to do a predictive site survey and use VisualRF to plan the coverage. What is a general estimate for the AP count that the architect should have in mind?
The architect plans to do a predictive site survey and use VisualRF to plan the coverage. What is a general estimate for the AP count that the architect should have in mind?
Question 3
An architect needs to plan the RF coverage. Which application has the greatest potential impact on RF design?
Question 4
A customer needs a networking solution that supports their Microsoft Skype for Business Unified Communications (UC) solution. The architect discovers that user wireless devices are Wi-Fi Multimedia (WMM) capable. Windows policies assign voice traffic DSCP 46 and video traffic DSCP 34.
Which potential issue should the architect explain to the customer about the default QoS settings?
Which potential issue should the architect explain to the customer about the default QoS settings?
Question 5
An architect plant to purpose an Aruba wireless solution with several Mobility Controllers (MCs) and a Mobility Master (MM) architecture. Wireless users run Skype for Business, a Unified Communications (UC) solution. The architect plans to use the Aruba SDN capabilities to integrate with the UC solution.
What helps to support high availability specifically for the SDN services?
What helps to support high availability specifically for the SDN services?
Question 6
A financial institution has an Aruba wireless system. Each floor is 19 meters by 23 meters (200 feet by 250 feet) and has 20 APs. The organization now requires dedicated Air Monitors (AMs). About how many AMs should the architect recommend per floor?
Question 7
An architect needs to help a customer design a management and monitoring solution for an Aruba network in an airport. The solution consists of an Aruba Mobility Master (MM), Aruba 7210 MCs, Aruba AP-335s, and Aruba 5496R switches. The architect plans to recommend Aruba AirWare.
The airport has a high-client device turnover and many highly mobile devices. Which changes should the architect make to the recommended solution based on this characteristic?
The airport has a high-client device turnover and many highly mobile devices. Which changes should the architect make to the recommended solution based on this characteristic?
Question 8
Refer to the exhibit.
![HPE6-A47 dumps exhibit](/images/HPE6-A47.files/image009.jpg)
An architect determines that 80 Gbps bandwidth is required for the link aggregation between the Building 1aggregation layer and Building 2. Which transceivers should the architect recommend for each pair of switches?
![HPE6-A47 dumps exhibit](/images/HPE6-A47.files/image009.jpg)
An architect determines that 80 Gbps bandwidth is required for the link aggregation between the Building 1aggregation layer and Building 2. Which transceivers should the architect recommend for each pair of switches?
Question 9
The customer has an office environment with users who have laptops that can connect with wired or wireless. Users also bring one or two of their own devices. An architect creates a proposal with Aruba AP-325s, 7210 Mobility Controllers (MCs), a Mobility Master (MM), and Aruba 2930M switches at the access layer to support the laptops and APs.
The architect plans to recommend 802.1X authentication without tunnelled node on Aruba 2930M switch ports that connect to laptops. What is one advantage of this form of authentication?
The architect plans to recommend 802.1X authentication without tunnelled node on Aruba 2930M switch ports that connect to laptops. What is one advantage of this form of authentication?
Question 10
What typically drives the need for an aggregation layer in modern networks?
Question 11
An architect plans to deploy a Mobility Controller (MC) at one building in subnet 10.23.01.0/24 and another MC in another building in subnet 10.44.12.0/24. The MCs need to provide redundancy for each other. What must the architect take into account in the redundancy plan?
Question 12
An architect plans 128 APs to support 12,800 devices in a very high density (VHD) design. The customer requires high availability, so the architect plans to recommend a pair of controllers. What is one reason to recommend 7210 controllers rather than 7205 controllers for this deployment?
Question 13
A customer currently has an Instant AP deployment. Which customer requirement would indicate that the customer needs to add a controller to the deployment?
Question 14
A customer has a small office building that needs approximately 32 APs. The solution must support basic rogue AP detection and provide a stateful firewall with role-based policies. The customer would like the simplest, most cost-effective deployment that meets their needs.
What should the architect recommend?
What should the architect recommend?
Question 15
A customer needs a wireless solution upgrade. Among the devices that need wireless access are printers. What information about the printers does the architect need to plan the wireless solution? (Select two.)
Question 16
An architect plans 12 APs for an auditorium that is 325 square meters (3, 498 square feet). Each AP has one 2.4 GHz radio and one 5 GHz radio. Both types of radios use 20 MHz channels.
Assume that DFS channels can be used in this design. How many 5 GHz collision domains does this design provide?
Assume that DFS channels can be used in this design. How many 5 GHz collision domains does this design provide?
Question 17
Read this scenario thoroughly, and then answer each question that displays on the right side of the screen. An architect proposes these products for a customer who wants a wireless and wired upgrade:
Aruba 2930M switches at the access layer
Aruba 5406R switches at the core
Aruba AP-325s
Aruba 7205 Mobility Controllers (MCs), deployed in a cluster
Aruba Mobility Master (MM)
Aruba ClearPass Cx000V
Aruba AirWare
The architect also needs to propose a security plan for the solution. The customer has 900 employees and up to 30 guests a day. The customer wants to protect the internal perimeter of the network with authentication and simple access controls. The customer is most concerned about wireless security, but also wants to ensure that only trusted users connect on the wire. However, the customer also wants all wired traffic to be forwarded locally on access layer switches. The customer already has a third-party firewall that protects the data center.
The customer wants to use certificates to authenticate user devices, but is concerned about the complexity of deploying the solution. The architect should recommend a way to simplify. For the most part users connect company-issued laptops to the network. However, users can bring their own devices and connect them to the network. The customer does not know how many devices each user will connect, but expects about two or three per-user. DHCP logs indicate that the network supports a maximum of 2800 devices.
Refer to the provided scenario.
Which solution should the architect recommend on the 2930M switches to authenticate and control wired employee devices?
![HPE6-A47 dumps exhibit](/images/HPE6-A47.files/image005.jpg)
![HPE6-A47 dumps exhibit](/images/HPE6-A47.files/image005.jpg)
![HPE6-A47 dumps exhibit](/images/HPE6-A47.files/image005.jpg)
![HPE6-A47 dumps exhibit](/images/HPE6-A47.files/image005.jpg)
![HPE6-A47 dumps exhibit](/images/HPE6-A47.files/image005.jpg)
![HPE6-A47 dumps exhibit](/images/HPE6-A47.files/image005.jpg)
![HPE6-A47 dumps exhibit](/images/HPE6-A47.files/image005.jpg)
The architect also needs to propose a security plan for the solution. The customer has 900 employees and up to 30 guests a day. The customer wants to protect the internal perimeter of the network with authentication and simple access controls. The customer is most concerned about wireless security, but also wants to ensure that only trusted users connect on the wire. However, the customer also wants all wired traffic to be forwarded locally on access layer switches. The customer already has a third-party firewall that protects the data center.
The customer wants to use certificates to authenticate user devices, but is concerned about the complexity of deploying the solution. The architect should recommend a way to simplify. For the most part users connect company-issued laptops to the network. However, users can bring their own devices and connect them to the network. The customer does not know how many devices each user will connect, but expects about two or three per-user. DHCP logs indicate that the network supports a maximum of 2800 devices.
Refer to the provided scenario.
Which solution should the architect recommend on the 2930M switches to authenticate and control wired employee devices?