13 January, 2020

IBM MQ V9.0 System Administration C1000-002 Torrent

It is more faster and easier to pass the IBM C1000-002 exam by using Vivid IBM IBM MQ V9.0 System Administration questuins and answers. Immediate access to the Regenerate C1000-002 Exam and find the same core area C1000-002 questions with professionally verified answers, then PASS your exam with a high score now.

Page: 1 / 5

Total 65 questions Full Exam Access

Question 1

What is one reason an administrator would have multiple queue managers on one server?

It allows fewer connections.

It allows for memory and CPU isolation.

It allows fewer outstanding units of work.

It allows for tuning log file sized differently.

Question 2

Which statement describes an MQl channel?

A bidirectional communications link between two queue managers.

A unidirectional communications link between two queue managers.

A bidirectional communications link that connects an application to a queue manager.

A unidirectional communications link that connects an application to a queue manager.

Question 3

The MQ Administrator has enabled Command Events in order to log all successful MQSC commands. What else must be done to also capture the unauthorized MQSC command attempts?

Enable Authority Events

Enable Security Events

Change the Authority Event setting from DISABLED to NODISPLAY

Change the Command Event setting from DISABLED to NODISPLAY

Question 4

On which platform would an administrator use the MQCMD_INQUIRE_CHANNEL_INIT PCF command?

z/OS

UNIX

IBM i

Windows

Question 5

All of a company’s IBM MQ installation (z/OS) are LTS (Long Term Support) releases. What must the OPMODE be set to after a migration is complete, in order to allow a backwards migration?

COMPAT

OLDFUNC

NEWFUNC

ROLLBACK

Question 6

The MQ administrator must meet a regulatory compliance requirement to preserve confidentiality of data in messages at rest, in traces, and in FFST files. Which MQ security control meets this requirement?

Advanced Message Security with a non-blank ENCALG specified in the policy records.

A non-blank value in the channel’s SSLCIPH attribute.

Set PasswordProtection to ALWAYS in the qm.ini file.

Use an API or API Crossing exit that encrypts the messages.

Question 7

An administrator has been asked to make changes to MQ config so that the MQ client application APP_A connecting to queue manager QM1 can reconnect automatically without re-starting the applications.
What does the administrator need to configure to achieve this?

Alter QMGR and set the attribute RECONN(YES)

Alter SVRCONN channel and set attribute AUTOCONN(TRUE)

Configure DefRecon attribute of CHANNELS stanza in mqclient.ini

Configure AutoConnect attribute of CHANNELS stanza in mqclient.ini

Question 8

An administrator is connecting to e remote queue manager to perform remote administration tasks using MQ Explorer.
Which two permissions should the administrator set on the target queue manager object for the user running MQ Explorer in addition to DISPLAY? (Select two.)

PUT

GET

BROWSE

CONNECT

INQUIRE

Question 9

When configuring MQ shared queues on z/OS, where are the queue objects that represents the attributes of the shared queues held?

VSAM database

External SQL Server

Shared DB2 repository

Shared Oracle database

Question 10

DEFINE QLOCAL(TENNIS)
DEFINE QLOCAL(RUGBY)
DEFINE QALIAS(BALLS) TARGET(BALL) DEFINE QLOCAL(QMGB) USAGE(XMITQ)
DEFINE QREMOTE(BALL) RNAME(BALL) RQMNAME(QMGB)
The following commands are issued on QMGB: DEFINE QLOCAL(RUGBY)
DEFINE QALIAS(BALLS) TARGET(TENNIS) DEFINE QLOCAL(QMGC) USAGE(XMITQ) DEFINE QLOCAL(TENNIS)
DEFINE QREMOTE(BALL) RNAME(BALL) RQMNAME(QMGC)
The following commands are issued on QMGC:
DEFINE QREMOTE(BALLS) RNAME(BALLS) RQMNAME(QMGB) DEFINE QLOCAL(QMGB) USAGE(XMITQ)
DEFINE QALIAS(BALL) TARGET(RUGBY) DEFINE QLOCAL(TENNIS)
DEFINE QLOCAL(RUGBY)
Where does the message go when it is put to BALLS on QMGC?

TENNIS on QMGC

TENNIS on QMGB

TENNIS on QMGA

TENNIS on QMGC

Question 11

What are two methods that can be used for a Unix MQI client to establish which SSLCipherSpec is used for a client channel? (Select two.)

It can be specified via the client definition table (CCDT).

By using the setmqscp command in an Active Directory environment.

It can be specified via the client MQSERVER environment variable.

It can be determined when client application issues an MQCONNX call.

It can be determined when security exit provides a channel definition.

Question 12

The following commands are issued on QMGRA: DEFINE QLOCAL(SATURN)
DEFINE QLOCAL(QMGRB) USAGE(XMITQ) DEFINE QALIAS(MARS) TARGET (VENUS)
DEFINE QALIAS(PLUTO) TARGET(SATURN)
DEFINE QREMOTE(VENUS) RNAME(SATURN) RQMNAME(QMGRB)
The following commands are issued on QMGRB: DEFINE QLOCAL(mars)
DEFINE QLOCAL(QMGRA) USAGE(XMITQ) DEFINE QALIAS(SATURN) TARGET(VENUS) DEFINE QALIAS(PLUTO) TARGET(VENUS)
DEFINE QREMOTE(VENUS) RNAME(PLUTO) RQMNAME(QMGRA)
Where does the message go when it is put to MARS on QMGRA?

MARS on QMGRB

MARS on QMGRA

SATURN on QMGRB

SATURN on QMGRA

Question 13

Queue managers QM1, QM2, QM3 are part of the cluster called MYCluster. Cluster queue Q1 only has one instance hosted on QM1. An administrator has issues a following command on QM1:
SUSPEND QMGR CLUSTER(MYCLUSTER)
An application connects to QM2 and pushes a message on Q1. Where does the message arrive?

On the queue Q1 on QM1

On the dead letter queue of QM2

On the dead letter queue of QM1

The application receives queue not available message

Question 14

An administrator has a new application that sends 2MB messages to a remote queue manager, which is significantly larger than current messages which are 50KB.
How can an administrator ensure minimal impact on the existing environment?

Set the workload balancing option to MIXEDSIZE.

Require the queue manager to use message chunking.

Set MSGGROUP to TRUE and MSGSIZE to a value of 2MB.

Use separate channels and transmit queues for the new messages.

Question 15

Queue manager QM1 has a remote queue RMT1 which is a remote definitions of the local queue L1 on queue manager QM2.
How would an administrator define the transmission queue so that messages on RMT1 on QM1 are sent to L1 on QM2?

DEFINE QLOCAL(‘QM2’) USAGE(XMITQ)

DEFINE QLOCAL(‘RMT1’) USAGE(XMITQ)

DEFINE QREMOTE(‘L1’) USAGE(XMITQ)

DEFINE QUALIAS(‘QM2’) USAGE(XMITQ)

Question 16

QM1 is a multi-instance queue manager on server1 and server2. Currently, it is NOT running. What is the effect of executing strmqm -x QM1 on server1?

QM1 becomes an active instance on server2.

QM1 becomes an active instance on server1.

QM1 becomes an active instance on server1 and a standby instance on server2.

QM1 becomes an active instance on server2 and a standby instance on server1.

Question 17

For MQ Appliance, which command can be used to set values in the mqat.ini?

setmqat

setmqini

setmqaut

setmqenv

Question 18

On AIX when migrating to MQv9, which command is required to make the latest version of the installation the primary installation?

setmqm

setmwenv

setmqaut

setmqinst

Question 19

An administrator wants to determine how many messages are on a TESTQ. Which MQSC command will return that information?

display qstatus testq curdepth

display qstatus testq message count

display qstatus testq type (message) count

display qstatus testq type (queue) curdepth

Question 20

Which FFST Report field can be used to trigger tracing to start?

FDC ID

FFST ID

Error ID

Probe ID

Question 21

In application triggering what is the role of trigger monitor process?

It monitors the initiation queue and based on trigger message issues a command to start an application.

It monitors the transmission queue and based on trigger message issues a command to start an application.

It monitors the application queue and when the trigger conditions are met and issues a command to start an application.

It monitors the application queue and when the trigger conditions are met, it creates a message and puts it on initiation queue.

Question 22

Given the following error on an MQ server:
AMQ7280: WebSphere MQ queue manager ’x’ appears unresponsive ln what file extension can this error be found?

*.ERR

*.FST

*.FDC

*.ALR

Page: 1 / 5

Total 65 questions Full Exam Access