28 April, 2024

Most Up-to-date HPE6-A70 Training For Implementing Aruba WLAN (IAW) 8.4 Certification

It is more faster and easier to pass the HP HPE6-A70 exam by using Refined HP Implementing Aruba WLAN (IAW) 8.4 questuins and answers. Immediate access to the Up to the immediate present HPE6-A70 Exam and find the same core area HPE6-A70 questions with professionally verified answers, then PASS your exam with a high score now.

Page: 1 / 10

Total 131 questions Full Exam Access

Question 1

Refer to the exhibit.
HPE6-A70 dumps exhibit

The exhibit shows output from a Mobility Master (MM) dashboard. What does the health status indicate?

It takes the AP about twice as long to send data to the client as expected if all transmissions succeeded.

About half of the heartbeats the client sends reaches the Mobility Manager (MM).

The maximum data rate that 802.11ac supports is about twice as high as the data rate the client uses.

The client device only complies with about half of the rules in the endpoint health policy.

Question 2

Refer to the exhibit.
HPE6-A70 dumps exhibit

A network administrator adds a global rule in the area shown in the exhibit. Where does the global rule take effect?

It immediately applies only to the guest role, as part of the final policy applied to the role.Administrators cannot apply the rule to other roles.

It immediately applies to the guest role and other roles, as part of the first policy applied to the role.

It immediately applies to the guest role and other roles, as part of the final policy applied to the role.

It immediately applies only to the guest role and other roles, as part of the first policy applied to the role.Administrators can choose to apply the rule to other roles.

Question 3

Which task can an Aruba Air Monitor (AM) perform?

Analyze wireless traffic patterns at the application level.

Optimize RF through the AP channel and transmit power plans.

Analyze RF signals to determine the cause of non-802.11 interference.

Help to detect rogue APs in the environment.

Question 4

A network administrator examines a list of 2.4GHz clients with low performance in the Mobility Master (MM) dashboard. Which property for a client should pose a concern as a potential performance issue?

Radio PHY of HT 20MHz

Max speed of 72Mbps

Goodput data rate of 12 Mbps

Usage of 10 MB

Question 5

A company has a Mobility Master (MM)-based solution. How does a Mobility Controller (MC) behave if it loses contact with all MM nodes?

The MC loses all licenses and cannot support APs or clients.

The MC retains its current licenses for 30 days.

The MC contacts Aruba Activate and uses the licensing limits defined there.

The MC maintains only licenses that have been locally installed on it.

Question 6

A company has an Aruba Mobility Master (MM)-based solution. A network administrator wants to collect and analyze information about clients and access points (APs) over extended periods of time.
What should the administrator do to achieve this goal?

Add Aruba AirWave to the solution.

Run a Traffic Analysis report on the MM.

Make sure that MM has sufficient AppRF licenses.

Enable archival from the MM interface Maintenance windows.

Question 7

If the decrypt-tunnel forwarding mode is selected in an employee WLAN, where is the user traffic decrypted?

at the switch

at the AP

at the controller

at the RADIUS server

Question 8

Refer to the exhibit.
HPE6-A70 dumps exhibit

Based on the exhibit, what is the maximum number of APs that this Mobility Master (MM) solution can support?

500

Question 9

Refer to the exhibit.
HPE6-A70 dumps exhibit

The exhibit shows output from a Mobility Master (MM) dashboard. What is a valid reason for the administrator to click the akamai square under applications?

to create filter rules in order to control wireless user access to this application

to download a report about the usage of this application over time

to see more details about this application, such as a list of aggregated sessions

to see the break down for only roles, destinations, WLANs and devices that use this application

Question 10

What is the difference between WPA and WPA2 encryption?

WPA encryption uses symmetric keys, and WPA2 encryption uses asymmetric keys.

WPA encryption acts at Layer 3, and WPA2 encryption acts at Layer 2.

WPA encryption works only with preshared key (PSK) authentication, and WPA2 encryption works with both PSK and 802.1X.

WPA encryption uses TKIP by default, and WPA2 encryption uses AES by default.

Question 11

Refer to the exhibits. Exhibit 1
HPE6-A70 dumps exhibit

Exhibit 2

A company has a Mobility Master (MM)-based solution with a guest WLAN. Users can connect to the WLAN, but they receive the error shown browser rather than see login page. Exhibit 2 shows the status for one of the guest clients.
What is one issue that could cause the errors described?

The firewall blocks DHCP traffic between the guest clients and the DHCP server.

The DHCP pool for guests does not assign users a DNS server address.

The MM and Mobility Controllers (MCs) have invalid certificates.

The Captive Portal is not enabled for the role to which these clients are assigned.

Question 12

Refer to the exhibit.
HPE6-A70 dumps exhibit

What is a valid way to help the APs discover devices that can control them?

Set up an Aruba Central subscription, and ensure that APs can reach the Internet.

Enable CPSec, and ensure the Mobility Master (MM) and Mobility Controllers (MCs) trust the Aruba certificates installed on the APs at the factory.

Specify the Mobility Master (MM) IP address in DHCP option 43 on the network DHCP server.

Map the Mobility Controller (MC) IP addresses to the aruba-master name on the network DNS server.

Question 13

A company has a single Aruba Mobility Master (MM)-based solution with two Mobility Controllers (MCs). Network administrators want APs in building 1 to support a WLAN but do not want APs in building 2 to support the WLAN.
How can administrator ensure that they can enforce this rule as they set up the WLAN in the Mobility Master (MM) Interface?

Place APs in different buildings in different AP Groups.

Assign APs in different buildings to different MM nodes.

Configure APs in different buildings to use different frequency bands.

Assign different radio profiles to APs in different buildings.

Question 14

A network administrator creates an employee WLAN on an Aruba solution that uses WLAN
WPA2-Enterprise security and an external RADIUS server. When the administrator tests the WLAN, the test client receives limited connectivity and cannot access any resources, but the RADIUS server shows that the user authenticated successfully.
What should the administrator check as a possible source of this issue?

the connectivity between the AP that the client is associated to and the MC

the firewall role and policy that apply to this user

the certificate on the RADIUS server

the connectivity between the Master Controller (MC) for the client and the RADIUS server

Question 15

Refer to the exhibit.
HPE6-A70 dumps exhibit

A network administrator needs to use Aruba AirWave to view statistics for an AP’s 802.11ac radio. How can the administrator update the information on-demand rather than wait the typical interval?

Click Poll Controller Now

Click the 802.11ac link

Log out of the interface and log back in

Refresh the browser

Question 16

What is a requirement for the Dashboard > Traffic Analysis window on the Aruba Mobility Master (MM) to
show data?

Airmatch and ClientMatch must be enabled.

The solution must have active PEFNG licenses.

Firewall policies must include application filtering rules.

WLANs must use the decrypt-tunnel forwarding option.

Page: 1 / 10

Total 131 questions Full Exam Access