28 November, 2019
[Nov-2019-21] Improve 70-743 Courses
It is impossible to pass Microsoft 70-743 exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Microsoft 70-743 practice questions. You will get a surprising result by our Most up-to-date Upgrading Your Skills to MCSA: Windows Server 2016 practice guides.
Question 1
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016.
You install the Hyper-V server role on VM1.
You need to ensure that the virtual machines hosted on VM1 can communicate with the virtual machines hosted on Server1.
What should you do?
You install the Hyper-V server role on VM1.
You need to ensure that the virtual machines hosted on VM1 can communicate with the virtual machines hosted on Server1.
What should you do?
Question 2
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has two virtual machines named VM1 and VM2.
You discover that VM1 and VM2 can communicate with Server1 over the network.
You need to ensure that VM1 and VM2 can communicate with each other only. The solution must prevent VM1 and VM2 from communicating with Server1.
Which cmdlet should you use?
You discover that VM1 and VM2 can communicate with Server1 over the network.
You need to ensure that VM1 and VM2 can communicate with each other only. The solution must prevent VM1 and VM2 from communicating with Server1.
Which cmdlet should you use?
Question 3
HOT SPOT
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server 1 has a virtual switch Switch1.
Server1 hosts the virtual machines configured as shown in the following table.
Windows firewall on VM1 and VM2 is configured to allow ICMP traffic. VM1 and VM2 connect to Switch1.
You fail to ping VM1 from VM2.
You need to view the VirtualSubnetid to which VM1 connects. Which cmdlet should you run on Server1.
Solution:
Get-VMNetworkAdapter-VMName VM1 | forest-list
Does this meet the goal?
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server 1 has a virtual switch Switch1.
Server1 hosts the virtual machines configured as shown in the following table.
Windows firewall on VM1 and VM2 is configured to allow ICMP traffic. VM1 and VM2 connect to Switch1.
You fail to ping VM1 from VM2.
You need to view the VirtualSubnetid to which VM1 connects. Which cmdlet should you run on Server1.
Solution:
Get-VMNetworkAdapter-VMName VM1 | forest-list
Does this meet the goal?
Question 4
Your network contains an Active Directory domain. The domain contains two Hyper-V hosts. You plan to perform live migrations between the hosts.
You need to ensure that the live migration traffic is authenticated by using Kerberos. What should you do first?
You need to ensure that the live migration traffic is authenticated by using Kerberos. What should you do first?
Question 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2016.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the BranchCache feature, and then you start the BranchCache service. Does this meet the goal?
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2016.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the BranchCache feature, and then you start the BranchCache service. Does this meet the goal?
Question 6
You have a remote access server named Server1 that runs Windows Server 2016. Server1 has DirectAccess enabled.
You have a proxy server named Server2. All computers on the internal network connect to the Internet by using the proxy.
On Server1, you run the command Set-DAClient -forceTunnel Enabled.
You need to ensure that when a DirectAccess client connects to the network, the client accesses all the Internet resources through the proxy.
What should you run on Server1?
You have a proxy server named Server2. All computers on the internal network connect to the Internet by using the proxy.
On Server1, you run the command Set-DAClient -forceTunnel Enabled.
You need to ensure that when a DirectAccess client connects to the network, the client accesses all the Internet resources through the proxy.
What should you run on Server1?
Question 7
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have the Hyper-V server role installed.
An iSCSI SAN connects to the network.
You create a LUN on the SAN and configure both servers to connect to the iSCSI target.
You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage.
You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously.
Which tool should you use?
You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have the Hyper-V server role installed.
An iSCSI SAN connects to the network.
You create a LUN on the SAN and configure both servers to connect to the iSCSI target.
You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage.
You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously.
Which tool should you use?
Question 8
You create a Nano server image named Nano1.vhdx by using the New-NanoServerImage cmdlet. You attach Nano1.vhdx to a Generation 1 virtual machine named Nano1.
When you start Nano1, you get the following error message: “Boot failure. Reboot and select proper Boot device or Insert Boot Media in selected Boot device”
You need to successfully start Nano server. What should you do?
When you start Nano1, you get the following error message: “Boot failure. Reboot and select proper Boot device or Insert Boot Media in selected Boot device”
You need to successfully start Nano server. What should you do?
Question 9
HOTSPOT
You have a server that runs Windows Server 2016.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Solution:
Box 1: No
The LastWriteTime of DC01.vhd was on June 21, 2016, and the current date is also June 21, 2016, but the MinimumFileAgeDays is 3.
MinimumFileAgeDays specifies a number of days. The deduplication engine optimizes files that users have not accessed in the number of days that you specify. If the last access time is not available, then the deduplication engine uses the last modified time.
Box 2: No
The size of Readme.txt, 12400bytes, is less than the Minimum File size, 32768 bytes. MinimumFileSize specifies the minimum size threshold, in bytes, for files that are optimized. The deduplication engine does not optimize files that do not meet the minimum threshold.
Box 3: Yes
The Software ISO file is both large and old enough for deduplication. References:
https://technet.microsoft.com/en-us/library/hh848438.aspx
Does this meet the goal?
You have a server that runs Windows Server 2016.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Solution:
Box 1: No
The LastWriteTime of DC01.vhd was on June 21, 2016, and the current date is also June 21, 2016, but the MinimumFileAgeDays is 3.
MinimumFileAgeDays specifies a number of days. The deduplication engine optimizes files that users have not accessed in the number of days that you specify. If the last access time is not available, then the deduplication engine uses the last modified time.
Box 2: No
The size of Readme.txt, 12400bytes, is less than the Minimum File size, 32768 bytes. MinimumFileSize specifies the minimum size threshold, in bytes, for files that are optimized. The deduplication engine does not optimize files that do not meet the minimum threshold.
Box 3: Yes
The Software ISO file is both large and old enough for deduplication. References:
https://technet.microsoft.com/en-us/library/hh848438.aspx
Does this meet the goal?
Question 10
DRAG DROP
On a new server, you install Windows Server 2016, and then you install the Hyper-V server role. You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of Windows Server.
Which four commands should you use in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.
Solution:
References:
https://docs.microsoft.com/en-us/virtualization/windowscontainers/deploy-containers/deploycontainers- on-server
Does this meet the goal?
On a new server, you install Windows Server 2016, and then you install the Hyper-V server role. You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of Windows Server.
Which four commands should you use in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.
Solution:
References:
https://docs.microsoft.com/en-us/virtualization/windowscontainers/deploy-containers/deploycontainers- on-server
Does this meet the goal?
Question 11
HOT SPOT
You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.
You need to apply patches to Server1.
Which two commands should you run before you apply the patches? To answer, select the appropriate options in the answer area.
Solution:
References:
https://support.microsoft.com/en-us/help/174799/how-to-update-windows-server-failover-clusters https://technet.microsoft.com/en-us/library/ee461003.aspx
Does this meet the goal?
You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.
You need to apply patches to Server1.
Which two commands should you run before you apply the patches? To answer, select the appropriate options in the answer area.
Solution:
References:
https://support.microsoft.com/en-us/help/174799/how-to-update-windows-server-failover-clusters https://technet.microsoft.com/en-us/library/ee461003.aspx
Does this meet the goal?
Question 12
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN
server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Network Policy Server, You modify the Network Policies on Server1. Does this meet the goal?
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN
server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Network Policy Server, You modify the Network Policies on Server1. Does this meet the goal?
Question 13
You have a server named Server1 that runs Windows Server 2016. Server1 is located on the perimeter network, and only inbound TCP port 443 is allowed to connect Server1 from the Internet. You install the Remote Access server role on Server1.
You need to configure Server1 to accept VPN connections over port 443. Which VPN protocol should you use?
You need to configure Server1 to accept VPN connections over port 443. Which VPN protocol should you use?
Question 14
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.
The virtual machines are configured as follows: Each virtual machine has one virtual network adapter.
VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
All of the servers on the network can communicate with all of the virtual machines. End of repeated scenario.
You plan to implement nested virtual machines on VM1. Which two features will you be prevented from using for VM1?
Start of repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.
The virtual machines are configured as follows: Each virtual machine has one virtual network adapter.
VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
All of the servers on the network can communicate with all of the virtual machines. End of repeated scenario.
You plan to implement nested virtual machines on VM1. Which two features will you be prevented from using for VM1?
Question 15
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a dynamically expanding virtual hard disk (VHD) file that is 900 GB. The VHD contains 400 GB of free space. You need to reduce the amount of disk space used by the VHD.
What should you run?
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a dynamically expanding virtual hard disk (VHD) file that is 900 GB. The VHD contains 400 GB of free space. You need to reduce the amount of disk space used by the VHD.
What should you run?
Question 16
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. Server1 is located in the perimeter network.
You install the Active Directory Federation Services server role on Server1. You create an Active Directory Federation Services (AD FS) farm by using a certificate that has a subject name of sts.contoso.com.
You need to enable certificate authentication from the Internet on Server1.
Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the solution.
You install the Active Directory Federation Services server role on Server1. You create an Active Directory Federation Services (AD FS) farm by using a certificate that has a subject name of sts.contoso.com.
You need to enable certificate authentication from the Internet on Server1.
Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the solution.
Question 17
You have a server that runs Windows Server 2016.
The server contains a storage pool named Pool1. Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4, and Disk5.
A virtual disk named VirtualDisk1 is stored in Pool1. VirtualDisk1 uses the parity storage layout. Disk3 fails.
You need to remove Disk3 from Pool1.
Which two commands should you run? Each correct answer presents part of the solution.
The server contains a storage pool named Pool1. Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4, and Disk5.
A virtual disk named VirtualDisk1 is stored in Pool1. VirtualDisk1 uses the parity storage layout. Disk3 fails.
You need to remove Disk3 from Pool1.
Which two commands should you run? Each correct answer presents part of the solution.
Question 18
You have two Hyper-V hosts named Server1 and Server2 that run windows server 2012 R2. The servers are nodes in a failover cluster named Cluster1.
You perform a rolling upgrade of the cluster nodes to Windows Server 2016.
You need to ensure that you can implement the Virtual Machine Load Balancing feature. Which cmdlet should you use?
You perform a rolling upgrade of the cluster nodes to Windows Server 2016.
You need to ensure that you can implement the Virtual Machine Load Balancing feature. Which cmdlet should you use?
Question 19
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a virtual machine named VM1 that uses a single VHDX file. VM1 is configured shown in the following table:
You plan to use VM1 as a virtual Machine Template to deploy shielded virtual machines. You need to ensure that VM1 can be used to deploy shielded virtual machines.
What should you run?
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a virtual machine named VM1 that uses a single VHDX file. VM1 is configured shown in the following table:
You plan to use VM1 as a virtual Machine Template to deploy shielded virtual machines. You need to ensure that VM1 can be used to deploy shielded virtual machines.
What should you run?
Question 20
HOTSPOT
You have a server named Server1 that runs Windows Server 2016 server. Server1 has the Docker daemon configured and has a container named Container1.
You need to mount the folder C:\Folder1 on Server1 to C:\ContainerFolder in Container1. Which command should you run? To answer, select the appropriate options in the answer area.
Solution:
Does this meet the goal?
You have a server named Server1 that runs Windows Server 2016 server. Server1 has the Docker daemon configured and has a container named Container1.
You need to mount the folder C:\Folder1 on Server1 to C:\ContainerFolder in Container1. Which command should you run? To answer, select the appropriate options in the answer area.
Solution:
Does this meet the goal?
Question 21
You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.
The Cluster Service on Server1 fails.
You need to identify the cause of the failure. What should you do?
The Cluster Service on Server1 fails.
You need to identify the cause of the failure. What should you do?
Question 22
HOT SPOT
You install the DHCP Server role on a server1. You create a new scope on Server1. The scope properties are configured as shown in the following exhibit.
Use the drop down menus to select the answer choice that completes each statement based on the information presented in the graphics.
Solution:
Does this meet the goal?
You install the DHCP Server role on a server1. You create a new scope on Server1. The scope properties are configured as shown in the following exhibit.
Use the drop down menus to select the answer choice that completes each statement based on the information presented in the graphics.
Solution:
Does this meet the goal?
Question 23
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
Solution: You open Active Directory Users and Computers, right-click contoso.com in the console tree, and then click Operations Master.
Does this meet the goal?
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
Solution: You open Active Directory Users and Computers, right-click contoso.com in the console tree, and then click Operations Master.
Does this meet the goal?
Question 24
You are implementing a new network. The network contains a DHCP server named DHCP1 that runs Windows Server 2016. DHCP1 contains a scope named Scope1 for the 192.168.0/24 subnet.
Your company has the following policy for allocating IP addresses: All server addresses must be excluded from DHCP scopes.
All client computer must receive IP addresses from Scope1.
All Windows servers must have IP addresses in the range of 192.168.0.200 to 192.168.0.240
All other network devices must have IP addresses in the range of 192.168.0.180 to 192.168.0.199. You deploy a print device named Print1.
You need to ensure that Print1 adheres to the policy for allocating IP addresses. Which command should you use?
Your company has the following policy for allocating IP addresses: All server addresses must be excluded from DHCP scopes.
All client computer must receive IP addresses from Scope1.
All Windows servers must have IP addresses in the range of 192.168.0.200 to 192.168.0.240
All other network devices must have IP addresses in the range of 192.168.0.180 to 192.168.0.199. You deploy a print device named Print1.
You need to ensure that Print1 adheres to the policy for allocating IP addresses. Which command should you use?
Question 25
HOT SPOT
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2. Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2. End of Scenario:
You need to identify which subnet mask you must use for subnet2. The solution must minimize the number of available IP addresses on Subnet2.
What subnet mask should you identify? To answer, select the appropriate options in the answer area.
Solution:
Does this meet the goal?
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2. Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2. End of Scenario:
You need to identify which subnet mask you must use for subnet2. The solution must minimize the number of available IP addresses on Subnet2.
What subnet mask should you identify? To answer, select the appropriate options in the answer area.
Solution:
Does this meet the goal?