20 October, 2019

[Oct-2019-20] Regenerate 1z0-932 Forum

It is impossible to pass Oracle 1z0-932 exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Oracle 1z0-932 practice questions. You will get a surprising result by our Replace Oracle Cloud Infrastructure 2018 Architect Associate practice guides.

Page: 1 / 13

Total 166 questions Full Exam Access

Question 1

What is a valid option when exporting a custom image?

object storage URL

archive storage URL

file storage service

block volume

Question 2

You are designing a high bandwidth, redundant connection between your data center and Oracle Cloud Infrastructure (OCI). While researching for OCI FastConnect locations, you notice that you are co-located with Oracle at one of the Oracle FastConnect locations in the Ashburn region.
What is the recommended design in this scenario?

Create a cross-connect group and have two or more cross-connects in that grou

Create an IPsec VPN connection on this group.

Setup two IPsec connections between your data center and OCI Ashburn regio

Create a OCI load balancer to distribute the traffic across the two connections.

Create a cross-connect group and have at least two or more cross-connects in that grou

Create at least two or more virtual circuits in the group.

Create a cross-connect group and have at least one cross-connect in that grou

Create at least one virtual circuit in the group.

Question 3

Which two features are offered natively on Oracle Cloud Infrastructure Database Cloud Service (DBCS)? (Choose two.)

Data Guard in Async mode within a region

GoldenGate replication between two regions

Data Guard in Maximum Protection mode

backup to Object Storage

Question 4

Which two statements are true about adding secondary VNICs to an existing compute instance? (Choose two.)

The primary and secondary VNIC association must be in the same availability domain

You can assign an Ephemeral Public IP to a secondary VNIC

You can remove the primary VNIC after the secondary VNIC’s attachment is complete

The primary and secondary VNIC association can be in different virtual cloud networks (VCNs)

Question 6

Which two parameters are required in a back end set’s HTTP health check? (Choose two.)

response body

URL path

timeout

port

status code

Question 7

Which certificate format is used with the load balancer?

PFX

PEM

PKCS12

CRT

Question 8

Which DNS resource record type is used to point a host name to an IPv4 address?

ALIAS

CNAME

AAAA

Question 9

Which deployment architecture is offered when you deploy the Platform Service Manager based Database Cloud Service (DBCS) onto Oracle Cloud Infrastructure?

Two node Primary RAC database leveraging ACFS for the shared file system

Single Instance database with a Single Instance Data Guard in Maximum Performance mode

Single Instance database with a Single Instance Data Guard in Maximum Protection mode

Two node Primary RAC database with a two node RAC Data Guard Standby in Maximum Performance mode

Question 10

Which three actions are required to configure a highly available and secure hybrid network between Oracle Cloud and your data center? (Choose three.)

Define a non-overlapping IP Address Space between the data center and the cloud.

Configure each of the CPEs to leverage each of the IPSec Tunnels created by the connection process.

Create two or more CPEs that map to the private IP addresses of the customer routers used in the IPSec VPN Tunnel.

Define a default route table entry for the VCN that directs all traffic to the data center network to a single DRG.

Create dynamic routing gateways in more than one AD within your region.

Question 11

You are asked to create a user that will access programmatic endpoints in Oracle Cloud Infrastructure. The user must not be allowed to authenticate by username and password.
Which two authentication options can you use? (Choose two.)

PEM Certificate file

Auth tokens

API signing key

Windows password

SSH key pair

Question 12

What is the maximum CIDR range that can be assigned when configuring a Virtual Cloud Network?

/16

/26

/24

Question 13

A company currently uses Microsoft Active Directory as its identity provider. The company recently purchased Oracle Cloud Infrastructure (OCI) to leverage the cloud platform for its test and development operations. As the administrator, you are now tasked with giving access only to developers so that they can start creating resources in their OCI accounts.
Which step will you perform to achieve this requirement?

Create a group for developers on OCI and map the group to a similar group in Microsoft Active Directory during the federation process.

Federate all Microsoft Active Directory groups with OCI to allow users to use their existing credentials.

Create a new user account for each user, and then create policies to provide access to developers.

Create a group for developers on OCI, export all the developers from Microsoft Active Directory, and then import them into the Identity and Access Management (IAM) group.

Question 14

Your on-premises hosted application uses Oracle database server. Your database administrator must have access to the database server for managing the application. Your database server is sized for seasonal peak workloads, which results in high licensing costs. You want to move your application to Oracle Cloud Infrastructure (OCI) to take advantage of CPU scaling options.
Which database offering on OCI would you select?

bare metal DB systems

VM DB systems

Autonomous Transactions Processing (ATP)

Autonomous Data Warehouse (ADW)

Question 15

Given: When creating multiple subnets within a Virtual Cloud Network (VCN), security lists are often made to group common services, for example, SSH and RDP (remote access), 80 and 443 (HTTP), and so on.
By default, what is the maximum number of security lists that can be associated with a subnet upon creation?

Question 16

As the Cloud Architect for your company, you have been tasked with designing a high performance (HPC) cluster in Oracle Cloud Infrastructure (OCI). The following requirements have been defined:
1Z0-932 dumps exhibit

The cluster must be resilient to any potential infrastructure failures.
1Z0-932 dumps exhibit

To minimize latency, all nodes must be deployed within the same availability domain (AD).
1Z0-932 dumps exhibit

Adding or replacing nodes within the cluster should take no more than 30 minutes.
Which two steps should be performed to satisfy these requirements in OCI? (Choose two.)

Deploy the cluster in a single AD with a shared file system that leverages the file storage service (FSS).Deploy a standby cluster in another AD and configure it to use the same shared file system.

Deploy the cluster in a single A

Place each of the nodes in one of the three different fault domains in that AD.

Create a backup of your HPC node compute instance boot volum

Launch new compute instances directly from the backup reduce provisioning time.

Create a custom image of your HPC node compute instanc

Launch new compute instances using this image to reduce provisioning time.

Deploy the cluster in a single A

Place each of the nodes in a different virtual cloud network (VCN) subnet.

Question 17

In which language are Terraform and Terraform providers written?

Python

Ruby

Question 18

You are running a mission-critical database in Oracle Cloud Infrastructure (OCI). You take regular backups of your DB system to OCI object storage. Recently, you notice a failed database backup status in the console.
What two steps can you take to determine the cause of the backup failure? (Choose two.)

Ensure the database archiving mode is set to NOARCHIVELOG

Ensure that your database host can connect to the OCI object storage

Restart the dcsagent program if it has a status of stop or waiting

Make sure that the database is not active and running while backup is in progress

Question 19

Your company has decided to move a few applications to Oracle Cloud Infrastructure and you have been asked to design it for Disaster Recovery (DR). One of the items of your design is to deploy the DR at least 300 miles from the home site and minimize the network latency as much as possible.
Based on that, what will be the recommended deployment?

Deploy applications in two separated VCNs in different Availability Domains and use VCN RemotePeering

Deploy applications in different regions and have them connected using VCN Remote Peering

Deploy applications in two separated VCNs in different regions and use VCN Local Peering

Deploy applications on the same region splitting workloads across Availability Domains.

Question 20

You are tasked with creating a highly available clustered application on Oracle Cloud Infrastructure consisting of three nodes. The round-trip latency between nodes must be less than 500 µs (micro-seconds) and your cluster should be resilient to hardware failure.
What is the recommended deployment strategy?

Deploy the cluster nodes in a single region and deploy each node into a different A

Select the same fault domain in each AD to ensure consistency.

Deploy the cluster nodes in two separate regions and take advantage of multiple availability domains (ADs) in each region.

Deploy the cluster nodes in a single region and deploy each node into a different AD.

Deploy the cluster nodes in a single region and deploy each node in different fault domains within a single AD.

Question 21

Which three actions need to be performed before attempting a data transfer service job?

Obtain an available host machine which can run the dts utility on-premise with SATA or USB drives attached for the transfer job.

Get access to a high-speed internet connection

Data Transfer Service and Storage Service Limits should be checked and raised if required.

Set up SSH access to a host on OCI to coordinate the transfer job.

Create an object bucket to receive the job.

Question 22

You are about to upload log file (5 TiB size) to Oracle Cloud Infrastructure object storage and have decided to use multipart upload capability for a more efficient and resilient upload.
Which two statements are true about multipart upload? (Choose two.)

Individual object parts can be as small as 10 MiB or as large as 50 GiB

While a multipart upload is still active, you cannot add parts even if the total number of parts is less than 10,000

The maximum size for an uploaded object is 10 TiB

You do not have to commit the upload after you have uploaded all the object parts

Question 23

You deployed a web server in Oracle Cloud Infrastructure using an ephemeral public IP. After a few changes in your web server configuration, you rebooted the server and a new public IP was associated to your instance.
What should you do to prevent this from happening again?

Create a reserved public IP and associate it with the security list that your complete instance is using

Create a reserved public IP and associate it with the subnet of your compute instance

Create a reserved public IP and associate it with the VNIC of your compute instance

Create a reserved public IP and associate it with the hosts file of your web server

Page: 1 / 13

Total 166 questions Full Exam Access