05 March, 2020

Realistic Cisco 400-351 Software

Certleader 400-351 Questions are updated and all 400-351 answers are verified by experts. Once you have completely prepared with our 400-351 exam prep kits you will be ready for the real 400-351 exam without a problem. We have Abreast of the times Cisco 400-351 dumps study guide. PASSED 400-351 First attempt! Here What I Did.

Cisco 400-351 Free Dumps Questions Online, Read and Test Now.

Page: 1 / 32

Total 393 questions Full Exam Access

Question 1

DRAG DROP

Solution:
1,2 - Background
0,3 - Best effort
6,7 - Voice
4,5 - Video

Does this meet the goal?

Yes

Question 2

DRAG DROP
Drag and drop the rogue detection “technique” on the left to the appropriate description on the right.
400-351 dumps exhibit

Solution:
400-351 dumps exhibit

Does this meet the goal?

Yes

Question 3

Which statement best describes MAC authentication?

The MAC address is used in place of the username in the EAP certificate exchange.

If WEP is used as a key cipher, the MAC address may be used in the key hash.

The MAC address can be spoofed, so it is insecure.

Users will not be able to connect unless some form of encryption is also use

Question 4

Which AireOS release is the first to support New Mobility on the Cisco 2504 WLC?

8.0x

8.1x

7.6x

7.4

Question 5

Which two statements about the various types or DevOps tools are true? (Choose two)

Puppet requires the installation of a master (server) and agents (clients) architecture for configuring systems.

Salt cannot communicate with clients through general SSH, it use minions client agents only.

Puppet and Chef are written in Python, Python skills are a must to operate these two.

Ansible does not require agent node installation and uses SSH for performing all tasks.

Chef and Puppet are much more attuned to the needs of system administrator

Question 6

You have Cisco Prime Infrastructure deployed on your network in high availability mode. Which statement is true?

The Health Monitor process only runs on the primary server Oracle Recovery Manager runs on both servers and synchronizes the databases when the primary unit fails.

High availability deployments consist of two Cisco Prime Infrastructure servers, a primary and a secondary Each of these servers has an active database and a standby backup copy of the active database Under normal circumstances, both servers are active via a common virtual IP address.

If you choose to deploy the primary and secondary servers on the same IP subnet, you can configure your devices to send notifications to Cisco Prime Infrastructure at a single virtual IP address.

You can trigger a failover manually or have it triggered automatically However, for maximum uptime and no data loss, it is recommended to configure the high availability pair for automatic failover.

Question 7

Which two statements regarding the Service Discovery Gateway feature are true? (Choose two.)

All network segments must be connected directly to the Service Discovery Gateway.

The Service Discovery Gateway can learn services from a single connected segment to build its cache and respond to requests acting as a proxy.

The Service Discovery Gateway feature enables multicast domain name system to operate across Layer 3 boundaries.

Service Discovery Gateway is not aimed at enhancing bring your own device.

The Service Discovery Gateway supports topologies with multiple hops.

Question 8

On a Cisco 5760 WLC, which of the below is not part of the initial setup script?

Wireless management interface

Host name

HTTP server login account

SNMP Network Management

NTP server

Enable password

Default routing protocol

My answer: -

Reference answer: G

Reference analysis:

From:
CT5760 Controller and Catalyst3850 Switch Configuration Example -
Cisco http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/116342-config-wlc-00.html
5760 WLC Initial Configuration
This section outlines the steps to succesfully configure the 5760 WLC in order to host wireless services.
Configure Setup Script
--- System Configuration Dialog --- Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enable secret
If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI in configuration mode- enable secret 0 <cleartext password>
----------------------------------
Would you like to enter the initial configuration dialog? [yes/no]: yes
At any point you may enter a question mark \'?\' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets \'[]\'.
Basic management setup configures only enough connectivity for management of the system, extended setup will ask you to configure each interface on the system
Would you like to enter basic management setup? [yes/no]: yes Configuring global parameters:
Enter host name [Controller]: w-5760-1
The enable secret is a password used to protect access to privileged EXEC and configuration modes.
This password, after entered, becomes encrypted in the configuration. Enter enable secret: cisco
The enable password is used when you do not specify an enable secret password, with some older software versions, and some boot images. Enter enable password: cisco
The virtual terminal password is used to protect access to the router over a network interface. Enter virtual terminal password: cisco Configure a NTP server now? [yes]: Enter ntp server address : 192.168.1.200 Enter a polling interval between 16 and 131072 secs which is power of 2:16 Do you want to configure wireless network? [no]: no
Setup account for accessing HTTP server? [yes]: yes Username [admin]: admin
Password [cisco]: cisco Password is UNENCRYPTED.
Configure SNMP Network Management? [no]: no Current interface summary
Any interface listed with OK? value "NO" does not have a valid configuration Interface IP-Address OK? Method Status Protocol
Vlan1 unassigned NO unset up up GigabitEthernet0/0 unassigned YES unset up up Te1/0/1unassigned YES unset up up Te1/0/2unassigned YES unset down down Te1/0/3unassigned YES unset down down Te1/0/4unassigned YES unset down down Te1/0/5unassigned YES unset down down Te1/0/6unassigned YES unset down down
Enter interface name used to connect to the
management network from the above interface summary: vlan1 Configuring interface Vlan1:
Configure IP on this interface? [yes]: yes IP address for this interface: 192.168.1.20
Subnet mask for this interface [255.255.255.0] : 255.255.255.0 Class C network is 192.168.1.0, 24 subnet bits; mask is /24 Wireless management interface needs to be configured at startup It needs to be mapped to an SVI that\'s not Vlan 1 (default) Enter VLAN No for wireless management interface: 120
Enter IP address :192.168.120.94 Enter IP address mask: 255.255.255.0
The following configuration command script was created: w-5760-1
enable secret 4 tnhtc92DXBhelxjYk8LWJrPV36S2i4ntXrpb4RFmfqY^Q enable password cisco line vty 0 15
password cisco
ntp server 192.168.1.200 maxpoll 4 minpoll 4 username admin privilege 15 password cisco no snmp-server
!
no ip routing
!i
nterface Vlan1 no shutdown
ip address 192.168.1.20 255.255.255.0
!i
nterface GigabitEthernet0/0 shutdown no ip address
!i
nterface TenGigabitEthernet1/0/1
!i
nterface TenGigabitEthernet1/0/2
!i
nterface TenGigabitEthernet1/0/3
!i
nterface TenGigabitEthernet1/0/4
!i
nterface TenGigabitEthernet1/0/5
!i
nterface TenGigabitEthernet1/0/6 vlan 120
interface vlan 120
ip addr 192.168.120.94 255.255.255.0 exit
wireless management interface Vlan120
!
end
[0] Go to the IOS command prompt without saving this config. [1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit. Enter your selection [2]: 2
Building configuration...
Compressed configuration from 2729 bytes to 1613 bytes[OK]
Use the enabled mode \'configure\' command to modify this configuration. Press RETURN to get started!

Question 9

Which three statements about 802.11ac are true? (Choose three.) Which three statements about 802.11ac are true? (Choose three.)

When using MU-MIMO, up to 8 devices can transmit data at the same time.

MU-MIMO allows one AP to transmit unique data to multiple stations simultaneously.

MU-MIMO is supported in Wave1.

802.11 a/b/g/n devices are able to connect to 802.11 ac radios.

802.11ac is supported in the 2.4- and 5-GHz radio band.

It is possible to reach 160 MHz by combining two discontiguous 80MHz channel block

Question 10

A wireless engineer must provide a report with the amount of data passed historically from the guest users Which Cisco Prime Infrastructure report provides this information?

NCS Guest Operations

Guest Accounts Status

Guest Association

Guest User Sessions

Question 11

You have configured VideoStream on a Cisco WLC and users are now viewing the company video broadcast over the wireless network. How can you verify you have VideoStream configured and working in the Cisco WLC GUI?

The Multicast Status shows "Normal Multicast" in the Multicast Group Details.

The Multicast Status shows "MediaStream Ongoing" in the Client detail page.

The Multicast Status shows "Multicast-direct Allowed" in the Multicast Group Details.

The Multicast Status shows "MediaStream Allowed" in the Multicast Group Detail

Question 12

Refer the exhibit.
400-351 dumps exhibit

Wireless voice users on VLAN 2150 report poor voice quality during heavy network usage.The WLC is configured correctly.Given the configuration in the exhibit,which possible cause of the problem is true?

MLSQoS is not enabled on the switch.

VLAN 2150 is not allowed on the trunkport of the switch

The WLC switch port dose not trust CoS values for Voice traffic that traverses the WLC

The wireless voice VLAN does not have the proper QoS setting

Question 13

Which of the following organizations certifies WLAN product compatibility and interoperability between vendors by providing certification testing?

CCX

ETSI

FCC

IEEE

Wi-Fi Alliance

Question 14

DRAG DROP
Drag and drop the mobility architecture components on the left to their primary function on the right?
400-351 dumps exhibit

Solution:
400-351 dumps exhibit

Does this meet the goal?

Yes

Question 15

DRAG DROP
Drag and drop the RRM function on the left to the entity that performs the function on the right
400-351 dumps exhibit

Solution:
400-351 dumps exhibit

Does this meet the goal?

Yes

Question 16

Refer to the exhibit,
400-351 dumps exhibit

based upon the given configuration which two statement are true? (choose two)

local RADIUS server is used

No password is required everyone can join wireless network

Users will be required to provide a username and password for authentication

User will be required to provide a password only order to get access

Remote RADIUS servers is used

Question 17

You have been asked to change your 7925 wireless IP phone scan mode from Auto lo Continuous. Which two statements about Continuous scan mode are true? (Choose two.)

Idle battery life is increased slightly when using this scan mode because the client does not have to send any association probe requests

The phone scans only when the basic service set is lost.

The phone scans only when on a call or when the signal strength (RSSI) is low.

This mode is recommended for environments where frequent roams occur or where smaller cells (pico cells) exist.

The phone scans continuously even when it is not in a cal

Question 18

Which three statements about enabling the wireless feature on Cisco Catalyst 4500E Supervisor Engine 8-E are true?(Choose three.)

Only the install boot method is supported.

Access points must terminate on the same chassis/SUP to join the wireless controller.

Visual Switching System must be disabled.

Maximum number of access points that can join the wireless controller is 200, and the maximum number of wireless clients that can be supported by wireless controller is 4000.

Bundle and install boot modes are supported.

Virtual Switching System must be enable

Question 19

Refer to the exhibit,
400-351 dumps exhibit

which is a configuration snippet of a Cisco 5760 controller running code IOS XE 3.6.3. Which statement about wlan 11 is true?

This configuration is for external WebAuth with an external RADIUS server.

This configuration is for WebAuth with local authentication.

This configuration is for custom WebAuth with local authentication.

This configuration is for WebAuth with an external RADIUS server.

This configuration is for custom WebAuth with an external RADIUS serve

Question 20

Which two characteristics of an loT network are true? (Choose two.)

The transmission rate in an loT network is consistent.

loT networks must be designed for low-powered devices.

loT networks use IS-IS for routing.

loT networks are 100% reliable

loT networks are bandwidth constrained

Question 21

DRAG DROP

Solution:
400-351 dumps exhibit

Does this meet the goal?

Yes

Question 22

DRAG DROP
Drag and drop the features from the left onto their definitions on the right.
400-351 dumps exhibit

Solution:
400-351 dumps exhibit

Does this meet the goal?

Yes

Question 23

DRAG DROP
Drag and drop the 802.11 technology feature on the left to the related frame type and IE on the right.
400-351 dumps exhibit

Solution:
400-351 dumps exhibit

Does this meet the goal?

Yes

Question 24

Which two statements about the client ARP caching feature, on a Cisco Autonomous AP deployment are true? (Choose two.)

When ARP caching is enabled, the access point forwards all ARP requests through the radio port to associated clients, and the client to which the ARP request is directed responds.

When ARP caching is disabled, the access point responds to ARP requests for associated clients and does not forward requests to clients.

ARP caching on the access point reduces the traffic on your wireless LAN to stopping ARP requests for client devices at the access point.

When ARP caching is enabled, when the access point receives an ARP request for an IP address not in the cache, the access point drops the request and does not forward it.

For client ARP caching, even when the access point has learned the IP addresses for all associated clients, it continues to accept ARP requests.

Question 25

Which statement about configuring the date and time on a wireless LAN controller is true?

When configuring wIPS on the wireless LAN controller you should not use the Universal Time Zone All logs and reports must be time-stamped with the localized time to assist with troubleshooting

You can configure an authentication channel between the controller and the NTP server

To set the wireless LAN controller date and time, only NTP should be used Manually configuring data and time is not supported

As part of their built-in resilience mechanism, Cisco Aironet lightweight access points always connect to the wireless LAN controller independently if the date and time has been set or not

Question 26

A user is presented with the underlying hardware and software needed to develop and offer applications via the Internet from a cloud service provider. Which cloud model is this user consuming?

Software as a Service

Platform as a Service

Application as a Service

Infrastructure as a Service

Page: 1 / 32

Total 393 questions Full Exam Access