23 August, 2020

Rebirth NSE7_EFW-6.2 Free Exam Questions For Fortinet NSE 7 - Enterprise Firewall 6.2 Certification

we provide Free Fortinet NSE7_EFW-6.2 download which are the best for clearing NSE7_EFW-6.2 test, and to get certified by Fortinet Fortinet NSE 7 - Enterprise Firewall 6.2. The NSE7_EFW-6.2 Questions & Answers covers all the knowledge points of the real NSE7_EFW-6.2 exam. Crack your Fortinet NSE7_EFW-6.2 Exam with latest dumps, guaranteed!

Online Fortinet NSE7_EFW-6.2 free dumps demo Below:

Page: 1 / 7

Total 91 questions Full Exam Access

Question 1

An administrator has configured the following CLI script on FortiManager, which failed to apply any changes to the managed device afterbeing executed.
NSE7_EFW-6.2 dumps exhibit

Why didn’t the script make any changes to the managed device?

Commands that start with the # sign are not executed.

CLI scripts will add objects only if they are referenced by policies.

Incomplete commands are ignored in CLI scripts.

Static routes can only be added using TCL scripts.

Question 2

In which two states is a given session categorized as ephemeral? (Choose two.)

A TCP session waiting to complete the three-way handshake.

A TCP session waiting for FIN ACK.

A UDP session with packets sent and received.

A UDP session with only one packet received.

Question 3

Examine the output of the 'diagnose debug rating' command shown in the exhibit; then answer the question below.
NSE7_EFW-6.2 dumps exhibit

Whichstatement are true regarding the output in the exhibit? (Choose two.)

There are three FortiGuard servers that are not responding to the queries sent by the FortiGate.

The TZ value represents the delta between each FortiGuard server\'s timezone and the FortiGate\'s time zone.

FortiGate will send the FortiGuard queries to the server with highest weight.

A server\'s round trip delay (RTT) is not used to calculate its weight.

Question 4

Examine the following partial outputs from two routing debug commands; then answer the question below.
# get router info kernel
tab=254 vf=0 scope=0type=1 proto=11 prio=00.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.1.254 dev=2(port1)
tab=254 vf=0 scope=0type=1 proto=11 prio=10 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.2.254 dev=3(port2)
tab=254 vf=0 scope=253type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/.->10.0.1.0/24 pref=10.0.1.254 gwy=0.0.0.0 dev=4(port3)
# get router info routing-table all s*0.0.0.0/0 [10/0] via 10.200.1.254, portl [10/0] via 10.200.2.254, port2, [10/0] dO.0.1.0/24 is directly connected, port3 dO.200.1.0/24 is directly connected, portl d0.200.2.0/24 is directly connected, port2
Which outbound interface or interfaces will be used by this FortiGate to route web traffic from internal users to the Internet?

port!

port2.

Both portl and port2.

port3.

Question 5

Examine the following traffic log; then answer the question below.
date-20xx-02-01 time=19:52:01 devname=master device_id="xxxxxxx" log_id=0100020007 type=event subtype=system pri critical vd=root service=kemel status=failure msg="NAT port is exhausted."
What does the log mean?

There is not enough available memory in the system to create a new entry in the NAT port table.

The limit for the maximum number of simultaneous sessions sharing the same NAT port has been reached.

FortiGate does not have any available NAT port for a new connection.

The limit for the maximum number of entries in the NAT port table has been reached.

Question 6

A FortiGate has two default routes:
NSE7_EFW-6.2 dumps exhibit

All Internet traffic is currently using port1. The exhibit shows partial information for one sample session of Internet traffic from an internal user:
NSE7_EFW-6.2 dumps exhibit

What would happen with the traffic matching the above session if the priority on the first default route (IDd1) were changed from 5 to 20?

Session would remain in the session table and its traffic would keep using port1 as the outgoing interface.

Session would remain in the session table and its traffic would start using port2 as the outgoing interface.

Session would be deleted, so the client would need to start a new session.

Session would remain in the session table and its traffic would be shared between port1 and port2.

Question 7

Which configuration can be used to reduce the number of BGP sessions in an IBGP network?

Neighbor range

Route reflector

Next-hop-self

Neighbor group

Question 8

An administrator cannot connect to the GIU of a FortiGate unit with the IP address 10.0.1.254. The administrator runs the debug flow while attempting the connection using HTTP. The output of thedebug flow is shown in the exhibit:
NSE7_EFW-6.2 dumps exhibit

Based on the error displayed by the debug flow, which are valid reasons for this problem? (Choose two.)

HTTP administrative access is disabled in the FortiGate interface with the IP address 10.0.1.254.

Redirection of HTTP to HTTPS administrative access is disabled.

HTTP administrative access is configured with a port number different than 80.

The packet is denied because of reverse path forwarding check.

Question 9

View the exhibit, which contains the output of diagnose syssession list, and then answer the question below.
NSE7_EFW-6.2 dumps exhibit

If the HA ID for the primary unit is zero (0), which statement is correct regarding the output?

This session is for HA heartbeat traffic.

This session is synced with the slave unit.

Theinspection of this session has been offloaded to the slave unit.

This session cannot be synced with the slave unit.

Question 10

View the exhibit, which contains the output of areal-time debug, and then answer the question below.
NSE7_EFW-6.2 dumps exhibit

Which of the following statements is true regarding this output? (Choose two.)

This web request was inspected using the root web filter profile.

FortiGate found the requested URL in its localcache.

The requested URL belongs to category ID 52.

The web request was allowed by FortiGate.

Question 11

View the exhibit, which contains a session entry, and then answer the question below.
NSE7_EFW-6.2 dumps exhibit

Which statement is correct regarding this session?

It is an ICMP session from 10.1.10.10 to 10.200.1.1.

It isan ICMP session from 10.1.10.10 to 10.200.5.1.

It is a TCP session in ESTABLISHED state from 10.1.10.10 to 10.200.5.1.

It is a TCP session in CLOSE_WAIT state from 10.1.10.10 to 10.200.1.1.

Question 12

A FortiGate's portl is connected to a private network. Its port2 is connected to the Internet. Explicit web proxy is enabled in port1 and only explicit web proxy users can access the Internet. Web cache is NOT enabled. An internal web proxy user is downloading a file from the Internet via HTTP. Which statements are true regarding the two entries in the FortiGate session table related with this traffic? (Choose two.)

Both session have the local flag on.

The destination IP addresses of both sessions are IP addresses assigned to FortiGate\'sinterfaces.

One session has the proxy flag on, the other one does not.

One of the sessions has the IPaddress of port2 as the source IP address.

Question 13

Four FortiGate devices configured for OSPF connected to the same broadcast domain. The first unit is elected as the designated router The second unit is elected as the backup designated router Under normal operation, how many OSPF full adjacencies are formed to each of the other two units?

Question 14

Which of the followingstatements is true regarding a FortiGate configured as an explicit web proxy?

FortiGate limits the number of simultaneous sessions per explicit web proxy use

This limit CANNOT be modified by the administrator.

FortiGate limits the total number of simultaneous explicit web proxy users.

FortiGate limits the number of simultaneous sessions per explicit web proxy user The limit CAN be modified by the administrator

FortiGate limits the number of workstations that authenticate using thesame web proxy user credentials.This limit CANNOT be modified by the administrator.

Question 15

What global configuration setting changes the behavior for content-inspected traffic while FortiGate is in system conserve mode?

av-failopen

mem-failopen

utm-failopen

ips-failopen

Question 16

An administrator has decreased all the TCP session timers to optimize theFortiGate memory usage. However, after the changes, one network application started to have problems. During the troubleshooting, the administrator noticed that the FortiGate deletes the sessions after the clients send the SYN packets, and before the arrival of the SYN/ACKs. When the SYN/ACK packets arrive to the FortiGate, the unit has already deleted the respective sessions. Which TCP session timer must be increased to fix this problem?

TCP half open.

TCP half close.

TCP time wait.

TCP session time to live.

Question 17

View the exhibit, which contains a screenshot of some phase-1 settings, and then answer the question below.
NSE7_EFW-6.2 dumps exhibit

The VPN is up, and DPD packets are being exchanged between both IPsec gateways; however, traffic cannot pass through the tunnel. To diagnose, the administrator enters these CLI commands:
NSE7_EFW-6.2 dumps exhibit

However, the IKE real time debug does not show any output. Why?

The debug output shows phases 1 and 2 negotiations onl

Once the tunnel is up, it does not show any more output.

The log-filter setting was setincorrectl

The VPN’s traffic does not match this filter.

The debug shows only error message

If there is no output, then the tunnel is operating normally.

The debug output shows phase 1 negotiation onl

After that, the administrator must enable the following real time debug: diagnose debug application ipsec -1.

Question 18

Which real time debug should an administrator enable to troubleshoot RADIUSauthentication problems?

Diagnose debug application radius -1.

Diagnose debug application fnbamd -1.

Diagnose authd console –log enable.

Diagnose radius console –log enable.

Question 19

Examine the output of the ‘get router info ospf neighbor’ command shown in the exhibit; then answer the question below.
NSE7_EFW-6.2 dumps exhibit

Whichstatements are true regarding the output in the exhibit? (Choose two.)

The interface ToRemote is OSPF network type point-to-point.

The OSPF router with the ID 0.0.0.2 is the designated router for the ToRemote network.

The local FortiGate is the backup designated router for the wan1 network.

The OSPF routers with the IDs 0.0.0.69 and 0.0.0.117 are both designated routers for the wan1 network.

Question 20

An administrator has configured a dial-up IPsec VPN with one phase 2, extended authentication (XAuth) and IKE mode configuration. The administrator has also enabled the IKE real time debug:
diagnose debug application ike-1 diagnose debug enable
In which order is each step and phase displayed in the debug output each time a new dial-up user is connecting to the VPN?

Phase1; IKE mode configuration; XAuth; phase 2.

Phase1; XAuth; IKE mode configuration; phase2.

Phase1; XAuth; phase 2; IKE mode configuration.

Phase1; IKE mode configuration; phase 2; XAuth.

Question 21

What is the purpose of an internal segmentation firewall (ISFW)?

It inspects incoming traffic to protect services in the corporate DMZ.

It is the first line of defense at the network perimeter.

It splits the network into multiple security segments to minimize the impact of breaches.

It is an all-in-one security appliance that is placed at remotesites to extend the enterprise network.

Question 22

A FortiGate is configured as an explicit web proxy. Clients using this web proxy are reposting DNS errors when accessing any website. The administrator executes the following debug commands and observes that the n-dns-timeout counter is increasing:
NSE7_EFW-6.2 dumps exhibit

What should the administrator check to fix the problem?

The connectivity between the FortiGate unit and the DNS server.

The connectivity between the client workstations and the DNS server.

That DNS traffic from client workstations isallowed by the explicit web proxy policies.

That DNS service is enabled in the explicit web proxy interface.

Question 23

When does a RADIUS server send an Access-Challenge packet?

The server does not have the usercredentials yet.

The server requires more information from the user, such as the token code for two-factor authentication.

The user credentials are wrong.

The user account is not found in the server.

Question 24

Examine the partial output from the IKE real time debug shown in the exhibit; then answer the question below.
NSE7_EFW-6.2 dumps exhibit

Why didn’t the tunnel come up?

IKEmode configuration is not enabled in the remote IPsec gateway.

The remote gateway’s Phase-2 configuration does not match the local gateway’s phase-2 configuration.

The remote gateway’s Phase-1 configuration does not match the local gateway’s phase-1configuration.

One IPsec gateway is using main mode, while the other IPsec gateway is using aggressive mode.

Page: 1 / 7

Total 91 questions Full Exam Access