26 May, 2021

Tested Cisco 300-610 Pdf Exam Online

Testking offers free demo for 300-610 exam. "Designing Cisco Data Center Infrastructure (DCID)", also known as 300-610 exam, is a Cisco Certification. This set of posts, Passing the Cisco 300-610 exam, will help you answer those questions. The 300-610 Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco 300-610 exams and revised by experts!

Check 300-610 free dumps before getting the full version:

Page: 1 / 5

Total 60 questions Full Exam Access

Question 1

Drag the requirements from the left onto the correct policy types on the right.
300-610 dumps exhibit

Solution:
300-610 dumps exhibit

Does this meet the goal?

Yes

Question 2

Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?

HyperFlex Edge support

encryption offload cards

dedicated compute nodes

fabric interconnects

Question 3

The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?

All the VDC have the same out-of-band IP address.

Each VDC has a dedicated out-of-band Ethernet management port.

Each VDC has a unique out-of-band IP address from the same IP subnet.

Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.

Question 4

Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?

Cisco Virtual Topology System

Cisco Data Center Network Manager

Cisco Nexus Fabric Manager

Cisco CloudCenter

Question 5

Refer to the exhibit.
300-610 dumps exhibit

What must be the default gateway of the servers in EPG Web?

subnet address of BD1

subnet address of L3Out

subnet address of BD2

NAT appliance

Question 6

An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?

A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.

A separate DSCP value must be configured for all FCIP VSAN traffic.

A separate DSCP value and priority queuing must be configured for all FCIP traffic.

Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.

Question 7

What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)

It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.

It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.

It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.

It provides a standards-based northbound interface for transparent integration with systems that operateat the customer-facing services layer.

It operates at the customer-facing services layer and provides the management interface for the virtual network devices.

Question 8

What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?

Cisco Intersight automatically creates an invisible cloud witness.

Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios.

Cisco UCS Manager provides service profile portability across nodes.

Cisco HyperFlex Edge provides native container support through the KVM hypervisor.

Question 9

When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?

BGP ECMP

Layer 4 to Layer 7 device package

inline load-balancing device

ITD

Question 10

A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
300-610 dumps exhibit

Solution:
300-610 dumps exhibit

Does this meet the goal?

Yes

Question 11

Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
300-610 dumps exhibit

Solution:
300-610 dumps exhibit

Does this meet the goal?

Yes

Question 12

Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
300-610 dumps exhibit

Solution:
300-610 dumps exhibit

Does this meet the goal?

Yes

Question 13

Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects? (Choose two.)

STP runs on the uplink ports of each VLAN, as defined by PVSTP+.

STP runs on the uplink ports of each VLAN, as defined by MSTP.

The STP parameter configuration is unsupported.

The STP parameter configuration is supported.

STP runs on the server ports.

Question 14

Which approach splits a pair of clustered fabric interconnects into two standalone devices?

Run the disable fips-mode command on each fabric interconnect.

Run the connect local-management command on each fabric interconnect.

Erase the configuration of both fabric interconnects.

Unplug the Layer 1 and Layer 2 interfaces between the devices.

Question 15

Which authentication software natively runs within the CLI of Cisco NX-OS devices?

Python

Ansible

Puppet

Chef

Question 16

What influences the number of ISLs that are required between Cisco MDS Series switches?

FCoE protocol

type of storage

end-to-end oversubscription ratio

N Port virtualization

Question 17

Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)

WWPN

EUI

IQN

WWN

OUI

Question 18

Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?

NPIV mode

FC end-host mode

NPV mode

FC switching mode

Question 19

Which orchestration tool should be used for the management and analytics of servers across multiple sites?

Cisco Intersight

Cisco Nexus Fabric Manager

Cisco UCS Manager

Cisco Data Center Network Manager

Question 20

What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)

It propagates hosts reachability without support of traffic flooding.

Layer 3 failures do not propagate beyond the OTV edge device.

It extends the spanning tree between data centers.

It is an open standard.

It constrains HSRP hello messages to each data center.

Question 21

What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)

supports Layer 3 port channels

disables spanning-tree

no spanning-tree blocked ports

uses all available uplink bandwidth

maintains single control plane

Question 22

Refer to the exhibit.
300-610 dumps exhibit

An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)

SAN Pin Groups on the Cisco UCS Fabric Interconnects.

NPV feature on the Cisco MDS Series.

end-host mode feature on the Cisco UCS Fabric Interconnects

NPIV feature on the Cisco MDS Series

Smart Zoning feature on the Cisco UCS Fabric Interconnects

Question 23

Which pools are used when a vNIC template is created in Cisco UCS Manager?

WWPN

UUID

MAC

Question 24

Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)

number of vHBAs

ARP entries

UUID assignment

VXLAN membership

target server

Question 25

Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?

BFD

UDLD

MCP

LLDP

Page: 1 / 5

Total 60 questions Full Exam Access