22 September, 2021

The Down To Date Guide To 350-601 Dump

Our pass rate is high to 98.9% and the similarity percentage between our 350-601 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 350-601 exam in just one try? I am currently studying for the Cisco 350-601 exam. Latest Cisco 350-601 Test exam practice questions and answers, Try Cisco 350-601 Brain Dumps First.

Free demo questions for Cisco 350-601 Exam Dumps Below:

Page: 1 / 0

Total 0 questions Full Exam Access

Question 1

An engineer is converting a Cisco MDS switch to support NPIV mode.
What should be considered when implementing the solution?

It requires mapping of external interface traffic.

It must be enabled on VSAN 1 only.

It must be enabled globally on all VSANs.

It requires the FLOGI database to be disabled.

Question 2

A POAP-enabled Cisco Nexus switch will not enter POAP mode.
Which two conditions should be verified? (Choose two.)

No startup configuration is available.

The switch is in bootup process.

The license file is missing on the switch.

Bootflash must contain a special directory named POAP with poap.py file.

No Cisco NX-OS image is present on the bootflash.

Question 3

Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual- site adjacency?

350-601 dumps exhibit

Question 4

An engineer must configure RBAC in Cisco UCS Manager in an existing data center environment.
Which two roles can be used to configure LAN connectivity policies? (Choose two.)

server-profile

network-admin

operations

enable

admin

Question 5

Which action must be performed before renumbering a Cisco UCS chassis?

Run the shut and no shut command on the connected ports.

Move the chassis to new ports on fabric interconnect.

Decommission the chassis.

Re-acknowledge the chassis.

Question 6

Refer to the exhibit.
350-601 dumps exhibit

What is the result of implementing this configuration?

The switch queries the TACACS+ server by using an encrypted text PAP login.

The TACACS+ server uses the type-6 encrypted format.

The switch queries the TACACS+ server by using a clear text PAP login.

The timeout value on the TACACS+ server is 10 seconds.

Question 7

Which two statements about modifying Cisco UCS user accounts are true? (Choose two.)

Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect.

The admin account can be used to log on by using SSH only.

The password of the user account must contain a minimum of 10 characters.

Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP.

The password of the user account expires in 30 days.

Question 8

Refer to the exhibit.
350-601 dumps exhibit

Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)

IOMs

Cisco UCS Manager

board controller

adapters

BIOS

Question 9

A network engineer is adding a Cisco HyperFlex data platform to the Cisco Intersight management portal.
Which two components are required for Intersight to claim the Cisco HyperFlex data platform? (Choose two.)

device FQDN

device claim code

device public IP address

device ID

device serial number

Question 10

Which method must a network engineer use to upgrade the BIOS firmware or a Cisco UCS standalone C-Series rack- mount server?

Use the U-ACPI Interface.

Use the Cisco host upgrade utility.

Use the Cisco hardware upgrade utility.

Use the Cisco host firmware policy.

Question 11

What are two capabilities of the Cisco Network Assurance Engine? (Choose two.)

It validates that devices comply with network security policies.

It predicts the impact of changes to the network.

It predicts the network load on a data center.

It ensures that network performance meets an SLA.

It verifies the speed of network packet flows by using telemetry.

Question 12

An engineer must ensure fabric redundancy when implementing NPV mode on a Cisco MDS 9000 Series Switch.
Which action enables fabric redundancy?

Use TE ports to connect to upstream switches.

Add a port channel to upstream switches.

Configure the NPV devices to use an external FLOGI database.

Connect the NPV devices to multiple upstream switches.

Question 13

DRAG DROP
A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches.
Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right.
Select and Place:
350-601 dumps exhibit

Solution:
350-601 dumps exhibit

Does this meet the goal?

Yes

Question 14

An engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch
event manager applet Backup-config event timer watchdog time 1800 name timer event cli match "copy running-config startup-config" What is the result of applying this configuration?

It generates an error because no action is mentioned.

It executes the copy running-config startup-coring command.

It saves the running configuration every 1800 seconds.

It blocks the copy running-config startup-config command.

Question 15

Which configuration generates a syslog message when CPU utilization is higher than 60%?

event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"

event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"

event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"

event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"

Question 16

An administrator needs to configure an automated policy to shut down a link when a given threshold is exceeded on MDS switch. Which feature needs to be used?

RMON

EEM

Call Home

Scheduler

Question 17

Which product includes prebuilt templates that can be used to customize fabric deployments?

Cisco Tetration

Cisco Data Center Network Manager

Cisco ACI

Cisco UCS Manager

Question 18

An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration.
Which configuration is expected to be saved by using this backup type?

systems

roles

servers

service profiles

Page: 1 / 0

Total 0 questions Full Exam Access