16 February, 2024

The Secret Of Cisco 300-710 Exam Answers

Act now and download your Cisco 300-710 test today! Do not waste time for the worthless Cisco 300-710 tutorials. Download Updated Cisco Securing Networks with Cisco Firepower (SNCF) exam with real questions and answers and begin to learn Cisco 300-710 with a classic professional.

Online Cisco 300-710 free dumps demo Below:

Page: 1 / 0

Total 0 questions Full Exam Access

Question 1

Which action should be taken after editing an object that is used inside an access control policy?

Delete the existing object in use.

Refresh the Cisco FMC GUI for the access control policy.

Redeploy the updated configuration.

Create another rule using a different object name.

Question 2

When do you need the file-size command option during troubleshooting with packet capture?

when capture packets are less than 16 MB

when capture packets are restricted from the secondary memory

when capture packets exceed 10 GB

when capture packets exceed 32 MB

Question 3

Which command is typed at the CLI on the primary Cisco FTD unit to temporarily stop running high-availability?

configure high-availability resume

configure high-availability disable

system support network-options

configure high-availability suspend

Question 4

On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?

transparent inline mode

TAP mode

strict TCP enforcement

propagate link state

Question 5

What is the difference between inline and inline tap on Cisco Firepower?

Inline tap mode can send a copy of the traffic to another device.

Inline tap mode does full packet capture.

Inline mode cannot do SSL decryption.

Inline mode can drop malicious traffic.

Question 6

After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize that you need to manually upload an MIB for the Cisco FMC. In which folder should you upload the MIB file?

/etc/sf/DCMIB.ALERT

/sf/etc/DCEALERT.MIB

/etc/sf/DCEALERT.MIB

system/etc/DCEALERT.MIB

Question 7

In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)

Traffic inspection can be interrupted temporarily when configuration changes are deployed.

The system performs intrusion inspection followed by file inspection.

They can block traffic based on Security Intelligence data.

File policies use an associated variable set to perform intrusion prevention.

The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.

Question 8

What is the benefit of selecting the trace option for packet capture?

The option indicates whether the packet was dropped or successful.

The option indicated whether the destination host responds through a different path.

The option limits the number of packets that are captured.

The option captures details of each packet.

Question 9

Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)

An option to re-apply NAT and VPN policies during registration is available, so users do not need to re-apply the policies after registration is completed.

Before re-adding the device in Cisco FMC, you must add the manager back in the device.

No option to delete and re-add a device is available in the Cisco FMC web interface.

The Cisco FMC web interface prompts users to re-apply access control policies.

No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.

Question 10

A network engineer is configuring URL Filtering on Firepower Threat Defense. Which two port requirements on the Firepower Management Center must be validated to allow communication with the cloud service? (Choose two.)

outbound port TCP/443

inbound port TCP/80

outbound port TCP/8080

inbound port TCP/443

outbound port TCP/80

Question 11

What is a result of enabling Cisco FTD clustering?

For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections.

Integrated Routing and Bridging is supported on the master unit.

Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails.

All Firepower appliances can support Cisco FTD clustering.

Question 12

Which two statements about bridge-group interfaces in Cisco FTD are true? (Choose two.)

The BVI IP address must be in a separate subnet from the connected network.

Bridge groups are supported in both transparent and routed firewall modes.

Bridge groups are supported only in transparent firewall mode.

Bidirectional Forwarding Detection echo packets are allowed through the FTD when using bridge-group members.

Each directly connected network must be on the same subnet.

Question 13

Which command-line mode is supported from the Cisco Firepower Management Center CLI?

privileged

user

configuration

admin

Question 14

Which report template field format is available in Cisco FMC?

box lever chart

arrow chart

bar chart

benchmark chart

Question 15

Which command is run on an FTD unit to associate the unit to an FMC manager that is at IP address 10.0.0.10, and that has the registration key Cisco123?

configure manager local 10.0.0.10 Cisco123

configure manager add Cisco123 10.0.0.10

configure manager local Cisco123 10.0.0.10

configure manager add 10.0.0.10 Cisco123

Question 16

In which two places can thresholding settings be configured? (Choose two.)

on each IPS rule

globally, within the network analysis policy

globally, per intrusion policy

on each access control rule

per preprocessor, within the network analysis policy

Question 17

Which two deployment types support high availability? (Choose two.)

transparent

routed

clustered

intra-chassis multi-instance

virtual appliance in public cloud

Question 18

Which action should you take when Cisco Threat Response notifies you that AMP has identified a file as malware?

Add the malicious file to the block list.

Send a snapshot to Cisco for technical support.

Forward the result of the investigation to an external threat-analysis engine.

Wait for Cisco Threat Response to automatically block the malware.

Question 19

DRAG DROP
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Select and Place:
Solution:

Does this meet the goal?

Yes

Question 20

What are two application layer preprocessors? (Choose two.)

CIFS

IMAP

SSL

DNP3

ICMP

Question 21

What is a valid Cisco AMP file disposition?

non-malicious

malware

known-good

pristine

Question 22

Which two actions can be used in an access control policy rule? (Choose two.)

Block with Reset

Monitor

Analyze

Discover

Block ALL

Question 23

In a Cisco AMP for Networks deployment, which disposition is returned if the cloud cannot be reached?

unavailable

unknown

clean

disconnected

Page: 1 / 0

Total 0 questions Full Exam Access