The Secret Of Microsoft 70-745 Preparation

Exam Code: 70-745 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Implementing a Software-Defined Datacenter (beta)
Certification Provider: Microsoft
Free Today! Guaranteed Training- Pass 70-745 Exam.

Check 70-745 free dumps before getting the full version:

Page: 1 / 6
Total 72 questions Full Exam Access
Question 1
- (Exam Topic 3)
You administer a Microsoft System Center Virtual Machine Manager (SCVMM) infrastructure. You have a Microsoft Azure subscription.
You must design a backup strategy that meets the following requirements:
*Back up the SCVMM hosts, virtual machines (VMs), and workloads.
*Use a protection agent to perform the backups.
*Automate the backup process.
You need to recommend a backup solution. What should you recommend?
My answer: -
Reference answer: D
Reference analysis:

None

Question 2
- (Exam Topic 3)
You plan to deploy a Windows Server Gateway (WSG). The gateway will be managed by Network Controller. You need to install and configure a Network Controller cluster.
Which four Windows PowerShell cmdlets should you run in sequence? To answer, move the appropriate Windows PowerShell cmdlets from the list of actions to the answer area and arrange them in the correct order.
70-745 dumps exhibit
Solution:
70-745 dumps exhibit

Does this meet the goal?
My answer: -
Reference answer: A
Reference analysis:

None

Question 3
- (Exam Topic 2)
You need to ensure that the Hyper-V hosts meet the requirements for the sales department application. Which three actions should you perform in sequence? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
70-745 dumps exhibit
Solution:
70-745 dumps exhibit

Does this meet the goal?
My answer: -
Reference answer: A
Reference analysis:

None

Question 4
- (Exam Topic 3)
You plan to deploy Windows Server Gateway (WSG) with Microsoft System Center Virtual Machine Manager (SCVMM).
You need to configure the send and receive buffers for the Hyper-V hosts.
Solution: You run the Windows PowerShell cmdlet Set-NetAdapterAdvancedProperty. Does the solution meet the goal?
My answer: -
Reference answer: A
Reference analysis:

You can use the following Windows PowerShell command to set the Send Buffers size:
Set-NetAdapterAdvancedProperty "NIC1" –DisplayName "Transmit Buffers" –DisplayValue 3000
You can use the following Windows PowerShell command to set the Receive Buffers size:
Set-NetAdapterAdvancedProperty "NIC1" –DisplayName "Receive Buffers" –DisplayValue 3000
References:
https://docs.microsoft.com/en-us/windows-server/administration/performance-tuning/subsystem/software-define

Question 5
- (Exam Topic 3)
You manage Microsoft System Center Virtual Machine Manager (SCVMM). You plan to implement software load balancer (SLB) on Microsoft Hyper-V host servers by using an SLB Multiplexer (MUX).
You identify the following requirements: Redirect all inbound traffic to the MUX.
Ensure that all outbound network traffic bypasses the MUX. You need to configure the environment.
Which components should you implement? To answer, drag the appropriate components to the correct traffic directions. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
70-745 dumps exhibit
Solution:
References:
https://technet.microsoft.com/en-US/library/mt632286.aspx

Does this meet the goal?
My answer: -
Reference answer: A
Reference analysis:

None

Question 6
- (Exam Topic 3)
A company has a Microsoft System Center virtual machine manager (SCVMM) environment. The environment includes a software load balancer (SLB) and virtual machine (VMs) that run Network controller.
You need to create a guest cluster. What should you do?
My answer: -
Reference answer: D
Reference analysis:

VMM 1801 and later supports guest clustering in SDN through an Internal Load Balancer(ILB) Virtual IP(VIP).
The ILB uses probe ports which are created on the guest cluster VMs to identify the active node. At any given time, the probe port of only the active node responds to the ILB and all the traffic directed to the VIP is routed to the active node. References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-guest-clusters?view=sc-vmm-1801

Question 7
- (Exam Topic 3)
Your company has two datacenters. You have Windows servers in both locations. The network that connects the datacenters has high bandwidth and low latency.
You are designing a new virtual machine (VM) and storage environment based on servers that run Windows Server 2016. You need to implement a solution that meets the following storage requirements:
Tolerates the failure of a single datacenter.
Ensures zero data loss in the event of a file system failure. Solution: You implement Distributed File System Replication. Does the solution meet the goal?
My answer: -
Reference answer: B
Reference analysis:

None

Question 8
- (Exam Topic 3)
You manage Microsoft system center virtual machine manager (SCVMM). You create a logical unit from a storage pool and allocate the logical unit to the host group. You plan to deploy new virtual machines (VMs) to storage arrays.
You must create a SAN copy capable template from existing VM. You need to finish creating the SAN copy capable template. Which four actions should you perform in sequence?
70-745 dumps exhibit
Solution:
References:
https://docs.microsoft.com/en-us/system-center/vmm/vm-san-copy?view=sc-vmm-1807

Does this meet the goal?
My answer: -
Reference answer: A
Reference analysis:

None

Question 9
- (Exam Topic 3)
You manage Microsoft System Center Virtual Machine Manager (SCVMM). You need to block specific packets on the virtual switch.
Which two types of virtual switch extensions can you use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
My answer: -
Reference answer: BD
Reference analysis:


References:
https://docs.microsoft.com/en-us/windows-hardware/drivers/network/overview-of-the-hyper-v-extensible-switch

Question 10
- (Exam Topic 3)
You manage a Microsoft System Center Virtual Machine Manager (SCVMM) environment. You plan to create
virtual machine (VM) networks and IP address pools. You need to ensure that VM networks are segmented.
Solution: You create a VM network with the No Isolation option.
Does the solution meet the goal?
My answer: -
Reference answer: B
Reference analysis:

None

Question 11
- (Exam Topic 3)
You plan to deploy a Nano Server that has the Microsoft Hyper-V role installed.
You must deploy the Nano Server host in a hyper-converged mode that has a Microsoft System Center Virtual Machine Manager (SCVMM) agent installed. You need to prepare a Nano Server VHD for a physical
machine.
Which three packages should you include in the VHD? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
My answer: -
Reference answer: BCD
Reference analysis:

References:
https://docs.microsoft.com/en-us/system-center/vmm/hyper-v-nano?view=sc-vmm-2016

Question 12
- (Exam Topic 3)
Your company has two datacenters. You have Windows servers in both locations. The network that connects the datacenters has high bandwidth and low latency.
You are designing a new virtual machine (VM) and storage environment based on servers that run Windows Server 2016. You need to implement a solution that meets the following storage requirements:
*Tolerates the failure of a single datacenter.
*Ensures zero data loss in the event of a file system failure.
Solution: You implement a storage replica with synchronous replication. Does the solution meet the goal?
My answer: -
Reference answer: A
Reference analysis:

None

Question 13
- (Exam Topic 3)
You are configuring network adapters within a Microsoft system center virtual machine (SCVMM) network fabric. You deploy switch extensions.
The switch must filter packets and choose the appropriate destination port. You need to select a virtual switch extension to include in the logical switch. Which type of virtual extension switch should you include?
My answer: -
Reference answer: A
Reference analysis:

None

Question 14
- (Exam Topic 3)
Microsoft Hyper-V host has a network interface card (NIC) named NIC1 that supports Remote Direct Memory Access (RDMA). You plan to install a second NIC at a later date.
The Hyper-V host must have a virtual switch named vSwitch1. Switch Embedded Teaming (SET) must be enabled on the NIC.
You need to ensure that you can use the same virtual switch when you add the second NIC.
How should you complete the Windows PowerShell command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
70-745 dumps exhibit
Solution:
References:
https://docs.microsoft.com/en-us/powershell/module/hyper-v/new-vmswitch?view=win10-ps

Does this meet the goal?
My answer: -
Reference answer: A
Reference analysis:

None

Question 15
- (Exam Topic 2)
You need to deploy the SDN network controller for the SCVMM test environment.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
70-745 dumps exhibit
Solution:
References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-controller?view=sc-vmm-1801

Does this meet the goal?
My answer: -
Reference answer: A
Reference analysis:

None

Question 16
- (Exam Topic 3)
A company has a Microsoft System center virtual machine manager (SCVMM) environment. The company also uses System center operations manager (SCOM). You integrate SCVMM with SCOM.
You need to ensure that alerts, notifications and monitoring is synchronizing between SCVMM and SCOM. What should you do?
My answer: -
Reference answer: A
Reference analysis:

PRO information is provided by Operations Manager, and can be VMM to optimize performance. You can map specific Operations Manager alerts to remedial actions in VMM. For example, you could migrate VMs to a different host after a hardware issue. In addition, with PRO enabled, Operations Managers can detect resource issues or hardware failures in the virtualization infrastructure.
References:
https://docs.microsoft.com/en-us/system-center/vmm/monitors-ops-manager?view=sc-vmm-1807

Question 17
- (Exam Topic 3)
You manage a datacenter that includes Software Defined Storage (SDS) and Microsoft System Center Virtual Machine Manager (SCVMM). You have a Microsoft Azure subscription.
You need to automate the replication of Hyper-V virtual machines (VMs) to Azure by using Azure Site Recovery (ASR).
Which three resources should you implement? Each correct answer presents part of a solution.
NOTE: Each correct selection is worth one point.
My answer: -
Reference answer: BDE
Reference analysis:

None

Question 18
- (Exam Topic 2)
You need to configure the network settings for the SLB in the test environment.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
My answer: -
Reference answer: AD
Reference analysis:

None

Question 19
- (Exam Topic 3)
You administer a Microsoft System Center Virtual Machine Manager (SCVMM) infrastructure. You have a Microsoft Azure subscription.
You must design a backup strategy that meets the following requirements:
*Back up the SCVMM hosts, virtual machines (VMs), and workloads.
*Use a protection agent to perform the backups.
*Automate the backup process.
You need to recommend a backup solution. What should you recommend?
My answer: -
Reference answer: D
Reference analysis:

None

Question 20
- (Exam Topic 3)
A company plans to deploy the host guardian service.
You need to ensure that hosts are approved if they match boot sequence and code integrity policies. What should you use with the host guardian service?
My answer: -
Reference answer: A
Reference analysis:

In guarded fabrics configured to use TPM attestation, each host must be configured with a code integrity policy that is trusted by the Host Guardian Service.
TPM-attestation: If your HGS is configured to use TPM attestation, the host servers must:
1. Use UEFI 2.3.1c and a TPM 2.0 module
2. Boot in UEFI mode (not BIOS or "legacy" mode)
3. Enable Secure Boot References:
https://docs.microsoft.com/en-us/system-center/vmm/guarded-deploy-host?view=sc-vmm-1807

Question 21
- (Exam Topic 3)
You use Microsoft System Center Virtual Machine Manager (SCVMM) to manage your company's virtual infrastructure.
You need to install a host server that can run the full version of the .NET framework. Solution: Install the host server as Windows Server 2016 Server Core.
Does the solution meet the goal?
My answer: -
Reference answer: B
Reference analysis:

References:
https://docs.microsoft.com/en-us/windows-server/administration/server-core/what-is-server-core

Question 22
- (Exam Topic 3)
You use Microsoft System Center Operations Manager to monitor System Center Virtual Machine Manager (SCVMM). You establish baselines for the virtualization hosts.
You configure monitors to detect when a system is experiencing problems. You define an alert to report that the threshold value is exceeded.
You need to ensure that Operations Manager sends an email to the SDDCAdmins distribution group when the alert condition occurs.
Which three steps should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
70-745 dumps exhibit
Solution:
70-745 dumps exhibit

Does this meet the goal?
My answer: -
Reference answer: A
Reference analysis:

None

Question 23
- (Exam Topic 1)
You need to configure the SLB service templates.
To which location should you import each component? To answer, drag the appropriate store locations to the correct components. Each location may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
70-745 dumps exhibit
Solution:
References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-slb?view=sc-vmm-1801

Does this meet the goal?
My answer: -
Reference answer: A
Reference analysis:

None

Page: 1 / 6
Total 72 questions Full Exam Access