21 September, 2024

Top Tips Of Up To The Immediate Present 201 Dump

Verified of 201 simulations materials and free exam for F5-Networks certification for candidates, Real Success Guaranteed with Updated 201 pdf dumps vce Materials. 100% PASS TMOS Administration exam Today!

Page: 1 / 21

Total 254 questions Full Exam Access

Question 1

A BIG-IP Administrator opens a case with F5 Support. The support engineer requests the BIG-IP appliance chassis serial number.
Which TMSH command will provide this information?

. list /sys software

show /sys version

list/sys diags

show /sys hardware

Question 2

Assume a BIG-IP has no NATs or SNATs configured. Which two scenarios are possible when client traffic arrives on a BIG-IP that is NOT destined to a self-IP? (Choose two.)

If the destination of the traffic does not match a virtual server, the traffic will be discarded.

If the destination of the traffic does not match a virtual server, the traffic will be forwarded based on routing tables.

If the destination of the traffic matches a virtual server, the traffic will be processed per the virtual server definition.

If the destination of the traffic matches a virtual server, the traffic will be forwarded, but it cannot be loadbalanced since no SNAT has been configured.

Question 3

What is the purpose of floating self-IP addresses?

to define an address that grants administrative access to either system at any time

to define an address that allows either system to initiate communication at any time

to define an address that allows network devices to route traffic via a single IP address

to define an address that gives network devices greater flexibility in choosing a path to forward traffic

Question 4

A BIG-IP Administrator uses a device group to share the workload and needs to perform service on a BIG-IP device currently active for a traffic group. The administrator needs to enable the traffic group to run on another BIG-IP device in the device group. What should the administrator do to meet the requirement?

Create a new Traffic Group and then fail to Standby Unit

Select Traffic Group and then select Failover

Select Traffic Group and then select Force to Standby

Select Traffic Group on Primary Unit and then select Demote

Question 5

Which three methods can be used for initial access to a BIG-IP system? (Choose three.)

CLI access to the serial console port

SSH access to the management port

SSH access to any of the switch ports

HTTP access to the management port

HTTP access to any of the switch ports

HTTPS access to the management port

HTTPS access to any of the switch ports

Question 6

Which statement is true concerning a functional iRule?

iRules use a proprietary syntax language.

iRules must contain at least one event declaration.

iRules must contain at least one conditional statement.

iRules must contain at least one pool assignment statement.

Question 7

How is persistence configured?

Persistence is an option within each pool's definition.

Persistence is a profile type; an appropriate profile is created and associated with virtual server.

Persistence is a global setting; once enabled, loadbalancing choices are superceded by the persistence method that is specified.

Persistence is an option for each pool membe

When a pool is defined, each member's definition includes the option for persistence.

Question 8

When upgrading a BIG-IP redundant pair, what happens when one system has been updated but the other has not?

Synching should not be performed.

The first system to be updated will assume the Active role.

This is not possible since both systems are updated simultaneously.

The older system will issue SNMP traps indicating a communication error with the partner.

Question 9

A BIG-IP Administrator needs to apply a health monitor for a pool of database servers named DB_Pool that uses TCP port 1521.
Where should the BIG-IP Administrator apply this monitor?

Local Traffic > Profiles » Protocol > TCP

Local Traffic > Nodes > Default Monitor

Local Traffic > Pools > De Pool > Members

Local Traffic > Pools > DB Pool > Properties

Question 10

Which Virtual Server type prevents the use of a default pool?

Performance (Layer 4)

Forwarding (IP)

Performance HTTP

Standard

Question 11

A BIG-IP Administrator adds new Pool Members into an existing, highly utilized pool. Soon after, there are reports that the application is failing to load for some users. What pool level setting should the BIG-IP Administrator check?

Availability Requirement

Allow SNAT

Action On Service Down

Slow Ramp Time

Question 12

The BIG-IP Administrator generates QKView using tmsh command "qkview -SO". In which directory does the BIG-IP appliance save the QKView?

/etc/tmp

/var/tmp

/shared/qkview

/var /tmp/qkview

Question 13

Refer to the exhibit.
201 dumps exhibit

A user attempts to connect to 10.10.10.1.80 using FTP over SSL with an FTPS client. Which virtual server will match and attempt to process the request?

vsjutps

vs_ftp

vs_http

nvfs

Question 14

A BIG-IP Administrator defines a device Self IP . The Self IP is NOT reachable from the network. What should the BIG-IP Administrator verify first?

The correct interface has been selected.

The correct VLAN has been selected.

Verify if auto last hop is disabled.

The correct Trunk has been selected.

Question 15

As a part of the Setup Utility, the administrator sets the host name for the BIG IP. What would be the result if the two systems in a redundant pair were set to the same host name?

Host names do not matter in redundant pair communication.

In a redundant pair, the two systems will always have the same host nam

The parameter is synchronized between the systems.

The first time the systems are synchronized the receiving system will be assigned the same self-IP addresses as the source system.

When the administrator attempts to access the configuration utility using the host name, they will always connect to the active system.

Question 16

A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity. The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers pool member CPU and memory load?

Round Robin

Dynamic Ratio

Ratio

Least Connection

Question 17

Users report that traffic is negatively affected every time a BIG-IP device fails over. The traffic becomes stabilized after a few minutes.
What should the BIG-IP Administrator do to reduce the impact of future failovers?

Enable Failover Multicast Configuration

Set up Failover Method to HA Order

Configure MAC Masquerade

Configure a global SNAT Listener

Page: 1 / 21

Total 254 questions Full Exam Access