06 July, 2020

Top Tips Of Up To The Minute 300-615 Free Exam

Certleader 300-615 Questions are updated and all 300-615 answers are verified by experts. Once you have completely prepared with our 300-615 exam prep kits you will be ready for the real 300-615 exam without a problem. We have Rebirth Cisco 300-615 dumps study guide. PASSED 300-615 First attempt! Here What I Did.

Free 300-615 Demo Online For Cisco Certifitcation:

Page: 1 / 0

Total 0 questions Full Exam Access

Question 1

A user reports that they cannot reach from a UCS server to an FC Storage array. Which command is used to test communication between an FCF and a target?

fcroute

traceroute

fcping

ping

Question 2

Refer to the exhibit. The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?

event statement

environment variable

event-default action statement

configure terminal action

Question 3

Refer to the exhibit. A new Cisco Nexus 5548 Switch connects to a network. SAN switching is configured on the switch. The switch fc2/10 NP uplink is shown in the exhibit. Which action ensures that fc2/10 is in an up state?

Replace the SFP port module in fc2/10.

Configure the admin port type E on the upstream switch that connects the port.

Enable NPIV on the upstream switch that connects the port.

Configure the BB_credit buffers on the upstream switch that connects the port.

Question 4

An engineer is troubleshooting a fabric discovery failure. Which two requirements must an engineer verify about switch connectivity to solve the problem? (Choose two.)

A Cisco APIC must be attached to a spine node only.

A Cisco APIC must be attached to leaf nodes.

Spine nodes must connect to other spine nodes.

A Cisco APIC must be dual-attached to two separate spine nodes.

Leaf nodes must connect to spine nodes only.

Question 5

Refer to the exhibit. Interface fc1/5 is offline. Which action should be taken to troubleshoot the issue?

Activate the correct zoneset for VSAN 100.

Update the FLOGI database to contain the FLOGI entries for interface fc1/5 in VSAN 100.

Update the FCNs database to contain names for VSAN 100.

Configure the upstream ports and the server ports to be in VSAN 100.

Question 6

A Fibre Channel interface on a Cisco Nexus 5000 Series Switch receives bit errors, and the switch disables the interface. A temporary workaround must be implemented before the root cause is identified. Which action does an engineer take to prevent this issue from reoccurring?

Verify that the SFPs are supported.

Change the SFP to operate at 4 Gbps instead of 2 Gbps.

Run the shutdown and then no shutdown command on the interface.

Run the switchport ignore bit-errors command on the interface.

Question 7

A request to activate the port security database is rejected. Which action do you perform to investigate the cause of the issue?

Enable the auto-learning feature.

Use the force option to identify rejected devices.

Find conflicting entries between the active and configuration databases.

Verify that devices are fully attached to the active database.

Question 8

Refer to the exhibit. HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to solve the problem?

Configure preempt on one of the switches in the HSRP group.

Configure the same HSRP priority between the two switches.

Configure the correct subnet mask on Nexus7K-1.

Configure HSRP version 2 on Nexus7K-2.

Question 9

Refer to the exhibit. An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?

The interface is working correctly and fully operational, but it is not in use.

The interface policy is misconfigured.

“out-of-service” is the default interface status in ACI.

“out-of-service” indicates that no service graph is in use for this interface.

Question 10

Refer to the exhibit. Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected. WAN-1 is for normal business-day activities.
300-615 dumps exhibit

WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily.
The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?

The event timer must be written in epoch time format.

The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail.

The Cron entry must be configured without double quotes.

The applet called “Backup” must include an action to remove the current static route.

Question 11

Refer to the exhibit. A switch is being downgraded to an earlier release because of a problem with the current release. After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?

Enable ISSD after the downgrade is complete.

Roll back to the original image.

Reload the switch.

Shut and no shut the interfaces to the FEX.

Question 12

Refer to the exhibit. An engineer is troubleshooting why user1, user2, and user3 from group STORAGE-ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?

Configure the role name to match the group name on Microsoft Active Directory.

Include specific users into MDS role configuration.

Configure SSH logins on Cisco MDS switch.

Integrate Cisco MDS with Microsoft Active Directory.

Question 13

Refer to the exhibit. The HSRP instance on both switches is showing as active. Which action resolves the issue?

Configure the HSRP timers to be the same.

Allow VLAN 100 between the switches.

Configure the IP address of N9K-B on the same subnet as N9K-A.

Configure preempt on only one of the switches.

Question 14

DRAG DROP
Drag and drop the actions from the left onto the faults that they resolve on the right. Not all options are used.
Select and Place:
300-615 dumps exhibit

Solution:
300-615 dumps exhibit

Does this meet the goal?

Yes

Question 15

A server administrator attempts to change the Cisco IMC KVM certificate to one signed by a private CA, but the certificate is not being accepted. What can cause this process to fail?

using a certificate with a password-protected private key

RSA encryption being used in the generation of the certificate.

AES encryption being used in the generation of the certificate.

public IP addres of the Cisco IMC not being included in the SAN.

Question 16

Refer to the exhibit. The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?

Reconfigure the initiator and the target to be in the same zones.

Reactivate the zoneset.

Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.

Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.

Question 17

A server fails to boot from the operating system after a RAID1 cluster migration. The RAID remains in an inactive state during and after a service profile association. Which action resolves the issue?

Configure the SAN boot target in the service profile.

Configure the SAN boot target to any configuration mode.

Use a predefined local disk configuration policy.

Remove the local disk configuration policy.

Question 18

Refer to the exhibit. Sw1 and Sw2 are two Cisco Nexus 9000 Series Switches that run Cisco NX-OS. They are VTEPs in the same vPC domain. Which statement describes what happens in this scenario?

Sw1 drops all traffic because there is no (S, G) OIF list to encapsulate VXLAN multicast packets and send them out to the underlay network through the uplink interfaces.

Sw1 performs the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs.

Sw1 and switch 2 perform the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs, depending on the hashing.

Sw2 did not send an IP PIM register to the rendezvous point for the multicast group of the VXLAN VNI.

Question 19

An engineer removes a VMM domain from an endpoint group called EPG-1, but the distributed port group fails to be deleted. Which action must be taken to resolve the issue?

Remove the port group manually.

Migrate all virtual machines in the EPG-1 to different hypervisors.

Remove the remaining EPGs from the VMM domain.

Migrate all virtual machines in the EPG-1 to different port groups.

Question 20

Refer to the exhibit. After a failover occurs, which two actions must be performed on Switch-B to manually preempt the operational primary role back to Switch-A? (Choose two.) A. Configure the local vPC role priority to have a lower value than Switch-A.

Configure the local vPC role priority to have a higher value than Switch-A.

Disable and then re-enable the vPC peer-keepalive link.

Configure the local vPC role priority to have the same value as Switch-A.

Disable and then re-enable the vPC peer link.

Question 21

An engineer is troubleshooting a custom AV pair that was created by a client on an external authentication server to map a read-only role for a specific security domain. Which AV pair solves the problem?

shell:domains=Security_Domain_1//Read_Role_1|Read_Role_2

shell:domains=Security_Domain_1/Write_Role_1|Read_Role_2

shell=Security_Domain_1/Read_Role_1|Read_Role_2

shell:domains=Security_Domain_1/Read_Role_1|Read_Role_2

Page: 1 / 0

Total 0 questions Full Exam Access