03 October, 2020

Up To Date 352-001 Free Question For CCDE Written Exam Certification

Cause all that matters here is passing the Cisco 352-001 exam. Cause all that you need is a high score of 352-001 CCDE Written Exam exam. The only one thing you need to do is downloading Actualtests 352-001 exam study guides now. We will not let you down with our money-back guarantee.

Free 352-001 Demo Online For Cisco Certifitcation:

Page: 1 / 20

Total 249 questions Full Exam Access

Question 1

In an OSPF network with 20 routers connected together with Ethernet cabling , which topology typically takes the longest to converge?

Full mesh

Ring

Squared

Triangulated

Partial mesh

Question 2

DRAG DROP

Solution:
352-001 dumps exhibit

Does this meet the goal?

Yes

Question 3

You are solving a design failure on a massive Hadoop cluster network that has an application with TCP incast behavior (also known as TCP Throughput collapse) affecting its many-to-one communications with packet loss at the last-hop network device. Which metric must be measured to ensure that the network provides the best performance for this application?

Availability

Bandwidth utilization

Jitter values

Buffer utilization

Question 4

Refer to the exhibit.
352-001 dumps exhibit

How should you redesign this network running BGP to improve availability of the routers 1A and 1B at the core site?

Deploy BGP PIC

Use link bundles over multiple slots

Enable graceful restart

Create a multichassis system with the two routers

Question 5

After a large EIGRP network had automatic summarization enabled throughout, it started experiencing routing loops. Which action should you take to quickly resolve the routing loops yet to perform summarization?

Redistribute connected routes at major IP networks boundaries

Redesign the IP addressing scheme

Increase the AD of the automatically summarized routes

Replace the automatic summarization with more specific summary routes

Question 6

A company would like to distribute a virtual machine (VM) hosting cluster between three data centers with the capability to move VMs between sites. The connectivity between data centers is IP only and the new design should use the existing WAN. Which Layer 2 tunneling technology do you recommend?

AToM

L2TPv3

OTV

VPLS

Question 7

A large enterprise network has two data centers and a WLAN edge with a large hub-and spoke
network. The complete network is configured as a single OSPF area, and spoke routers are connected to unreliable WAN links. Which two changes should you make to deploy LSA on the spoke routers? (Choose two)

Place spoke routers in stub areas

Make the hub routers ABR

Make the hub routers ASBR

Place spoke routers in totally stubby areas

Keep the spoke routers in normal areas

Question 8

Which three network management requirements are common practices in network design? (Choose
three)

Ensure that all network devices have their clocks synchronized.

Collect SNMP poll information for future regression analysis.

Capture both ingress and egress flow-based packets, while avoiding duplication of flows.

Look at average counters instead of instantaneous counters for inconsistent and bursty KPIs, such as CPU utilization and interface utilization.

Validate data plane health, and application and services availability, with synthetic traffic.

Question 9

You are asked to design an RSVP-TEL LSP protection solution for a large service provider network
.Which traffic protection mechanism is highly scalable and ensure that multiple LPS always terminate at the same merge point?

Shared explicit protection.

Detour LSPs.

1:N protection.

1:1 protection.

Question 10

In a network with dynamic mutual redistribution between multiple OSPFv2 and EIGRP boundaries, which two mechanisms avoid suboptimal routing? (Choose two)

Route filtering

AD manipulation

Matching EIGRP process ID

Matching OSPF external routes

Route tagging

Question 11

Which two application requirements are mandatory for traffic to receive proper treatment when
placed in the priority queue? (Choose two)

WRED drop treatment

Small transactions (HTTP – like behavior)

Tolerance to packet loss

Intolerance to jitter

TCP based application

Question 12

Which three options are IS-IS design considerations when connecting two Layer 3 switches directly using a 10 GBASE-T cabling and formatting an IS-IS neighbor adjacency?

The default IS-IS network type is point-to-point so a DIS is not elected

A DIS is elected between the IS-IS neighbors and the elected DIS is pre-empted if router with a higher system ID is connected

The area, levels, and interface MTU parameters must match, and system MTU must be unique for two IS-IS routers to become adjacent

Faster IS-IS hello and dead timers increase bandwidth and CPU use, and may cause instability

The IS-IS hello and dead timers should be tuned to detect failures as quickly as possible

A DIS is elected between the IS-IS neighbors and the elected Dis is pre-empted if a router with a lower system ID is connected

The hello and dead timers must match for two IS-IS routers to become adjacent

Question 13

What is an implication of using route reflectors in an iBGP topology?

Route reflection limits the total number of iBGP routers.

Route reflection causes traffic to flow in a hub-and-spoke fashion.

The manipulation of BGP attributes is not supported on the other routers than the route reflectors.

Route reflectors can create routing loops when more than one router reflector is used in the same cluster.

Multipath information is difficult to propagate in a route reflector topology.

Question 14

Which open source message broker is in the Cisco Cloud Center?

Apache kafka

HornetQ

RabbitMQ

Fuse Message Broker

Oracle Message Broker

Question 15

Which two techniques are used in an OSPF network design to slow down the distribution of topology
information caused by a rapidly flapping link? (Choose two)

LSA throttling

SPF throttling

IP event dampening

Link-state incremental SPF

Link-state partial SPF

Question 16

A regional ISP is running MPLS TE. These tunnels are configured manually using paths. Which
technology centralizes the traffic engineering decisions to reduce operational complexity?

BGP Link State

DiffServ-TE

TE autobandwidth

Shared Risk link Group

Question 17

Which two options are IoT use cases that require the low-latency and high reliability that 5G
networks provide? (Choose two)

Sports and Fitness

Smart Home

Automotive

Smart Cities

Industrial Automation

Health and wellness

Question 18

Company ABC grew organically and now their single-area OSPF network has an unacceptably slow
convergence time after a topology change. To address the slow convergence time, they want to introduce a multiarea OSPF design and implement address summarization at the area border routers, which option should be their main concern about this redesign?

Routing is suboptimal

SPF calculation takes longer

Operations complexity is increased

More memory is needed across the routers on the network

Question 19

Refer to the exhibit.
352-001 dumps exhibit

You are designing MPLS-TE for this network. The links form Perth to Sydney and from Perth to Adelaide share the same optical fiber in one given segment. Which feature should you implement to eliminate the risk that a backup tunnel is installed over the same optical fiber as the primary one?

Shared Risk Link Groups

MPLS-TE Path Protection

MPLS-TE auto-tunnel backup

MPLS-TE Link protection

Question 20

An enterprise campus is adopting a network virtualization design solution with these requirements
It must include the ability to virtualize the data plane and control plane by using VLANs and VRFs It must maintain end-to-end logical path transport separation across the network
resources available grouped at the access edge
Which two primary models can this network virtualization design be categorized? (Choose two)

Path isolation

Session isolation

Group virtualization

Services virtualization

Edge isolation

Question 21

A network has several routers running IS-IS L1L2 mode on the same Ethernet segment. Which action
reduces to a minimum the number of IS-IS adjacencies in this segment?

Define only the router on the segment to be DIS

Change all routers connected to this segment to a single-level area

Make the interface priority on the backup DIS lower than the primary DIS

Change half the routers to be L1-only and other half to be L2-only on this segment

Question 22

Which two options describe the advantages of using DWDM over traditional optical networks?
(Choose two)

Inherent topology flexibility with intelligent chromatic dispersion

Inherent topology flexibility and service protection provided without penalty through intelligent oversubscription of bandwidth reservation

Inherent topology flexibility with built-in service protection

Inherent topology flexibility with a service protection provided through a direct integration with an upper layer protocol

Ability to expand bandwidth over existing optical infrastructure

Question 23

You are designing a WAN network solution with EIGRP based on VPLS. The interface speed is 10Mb/s,
but the access rate of the WAN connection is 256 Kb/s. What should you include in the network design, in order to avoid potential issues with EIGRP?

Limit EIGRP traffic to the access rate with a policer.

Tag outbound EIGRP traffic and have the WAN provider add it to the priority queue.

Limit traffic to the access rate with interface traffic shaping.

Set the interface bandwidth to match the access rate.

Question 24

As network designer, which option is your main concern with regards to virtualizing multiple network
zones into a single hardware device?

Fate sharing

CPU resource allocation

Congestion control

Security

Bandwidth allocation

Question 25

As part of network design, two geographically separated data centers must be interconnected using
Ethernet-over-MPLS pseudowire. The link between the sites is stable, the topology has no apparent loops, and the root bridges for the respective VLANs are stable and unchanging. Which aspect must be the part of the design to mitigate the risk of connectivity issues between the data centers?

Enable 802.1d on one data center, and 802.1w on the other.

Ensure that the spanning tree diameter for one or more VLANs is not too large.

Enable UDLD on the link between the data centers.

Enable root guard on the link between the data centers.

Question 26

Which reason prevents a designer from using a GDOI-based VPN to secure traffic that traverses the
Internet?

Enterprise host IP addresses are typically not routable.

GDOI is less secure than traditional IPsec.

Network address translation functions interfere with tunnel header preservation.

The use of public addresses is not supported with GDOI.

Question 27

You are presented with requirements to design a development, testing and production environments. These environment should communicate with each other, yet they should be kept as separate failure domains. Which routing protocol should be configured on the links between the networks to support the design requirements?

OSPF

EIGRP

IS-IS

BGP

Page: 1 / 20

Total 249 questions Full Exam Access