20 June, 2022

Up To The Minute 300-430 Vce For Implementing Cisco Enterprise Wireless Networks (ENWLSI) Certification

we provide Precise Cisco 300-430 exam cram which are the best for clearing 300-430 test, and to get certified by Cisco Implementing Cisco Enterprise Wireless Networks (ENWLSI). The 300-430 Questions & Answers covers all the knowledge points of the real 300-430 exam. Crack your Cisco 300-430 Exam with latest dumps, guaranteed!

Free 300-430 Demo Online For Cisco Certifitcation:

Page: 1 / 5

Total 60 questions Full Exam Access

Question 1

An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)

Static WEP + 802.1X

WPA+WPA2

Static WEP

CKIP

802.1X

Question 2

Refer to the exhibit.
300-430 dumps exhibit

The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server. What does the capture prove?

The Cisco CMX server receives NetFlow data from the WLC.

The Cisco CMX server receives NMSP traffic from the WLC.

The Cisco CMX server receives SNMP traffic from the WLC.

The Cisco CMX server receives Angle-of-Arrival data from the WLC.

Question 3

The IT manager is asking the wireless team to get a report for all guest user associations during the past two weeks. In which two formats can Cisco Prime save this report? (Choose two.)

CSV

PDF

XLS

DOC

plain text

Question 4

An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN. Which configuration is needed to complete this task?

Change the WLAN reserved bandwidth for WebEx

Create an AVC profile for WebEx

Create an ACL for WebEx

Change the AVC application WebEx-app-sharing to mark

Question 5

Branch wireless users report that they can no longer access services from head office but can access services locally at the site. New wireless users can associate to the wireless while the WAN is down. Which three elements (Cisco FlexConnect state, operation mode, and authentication method) are seen in this scenario? (Choose three.)

authentication-local/switch-local

WPA2 personal

authentication-central/switch-central

lightweight mode

standalone mode

WEB authentication

Question 6

An engineer configures the wireless LAN controller to perform 802.1x user authentication. Which configuration must be enabled to ensure that client devices can connect to the wireless, even when WLC cannot communicate with the RADIUS?

pre-authentication

local EAP

authentication caching

Cisco Centralized Key Management

Question 7

Which QoS level is recommended for guest services?

gold

bronze

platinum

silver

Question 8

An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)

X, Y real location

client description

AP name

client MAC address

WLC IP address

Question 9

Refer to the exhibit.
300-430 dumps exhibit

Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)

TSPEC

SIFS

802.11e

WMM

APSD

Question 10

An engineer is implementing Cisco Identity-Based Networking on a Cisco AireOS controller. The engineer has two ACLs on the controller. The first ACL, named BASE_ACL, is applied to the corporate_clients interface on the WLC, which is used for all corporate clients. The second ACL, named HR_ACL, is referenced by ISE in the Human Resources group policy. What is the resulting ACL when a Human Resources user connects?

HR_ACL appended with BASE_ACL

HR_ACL only

BASE_ACL appended with HR_ACL

BASE_ACL only

Question 11

Which three properties are used for client profiling of wireless clients? (Choose three.)

HTTP user agent

DHCP

MAC OUI

hostname

OS version

IP address

Question 12

What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?

3 hours

24 hours

3 days

7 days

Question 13

During the EAP process and specifically related to the client authentication session, which encrypted key is sent from the RADIUS server to the access point?

WPA key

session key

encryption key

shared-secret key

Question 14

For security purposes, an engineer enables CPU ACL and chooses an ACL on the Security > Access Control Lists > CPU Access Control Lists menu. Which kind of traffic does this change apply to, as soon as the change is made?

wireless traffic only

wired traffic only

VPN traffic

wireless and wired traffic

Question 15

Refer to the exhibit. An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?
300-430 dumps exhibit

It must be Inbound because traffic goes to the WLC.

Packet direction has no significance; it is always Any.

It must be Outbound because it is traffic that is generated from the WLC.

To have the complete list of options, the CPU ACL must be created only by the CLI.

Question 16

Which three characteristics of a rogue AP pose a high security risk? (Choose three.)

open authentication

high RSSI

foreign SSID

accepts clients

low RSSI

distant location

Question 17

Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?

FlexConnect ACL

VLAN name override

CCKM/OKC

AAA override

Question 18

What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?

EAP-PEAP with 802.1x port authentication

EAP-TLS with 802.1x port authentication

EAP-FAST with CAPWAP DTLS + port authentication

EAP-FAST with CAPWAP DTLS

Question 19

Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?

Policy Profile

AP Join Profile

Flex Profile

RF Profile

Question 20

Which two statements about the requirements for a Cisco Hyperlocation deployment are true? (Choose two.)

After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN controller must be restarted.

NTP can be configured, but that is not recommended.

The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.

The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.

If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.

Question 21

Which statement about the VideoStream/Multicast Direct feature is true?

IP multicast traffic is reliable over WLAN by default as defined by the IEEE 802.11 wireless multicast delivery mechanism.

Each VideoStream client acknowledges receiving a video IP multicast stream.

It converts the unicast frame to a multicast frame over the air.

It makes the delivery of the IP multicast stream less reliable over the air, but reliable over Ethernet.

Question 22

An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP. Which client feature becomes available only if this configuration is changed?

multicast

static IP

fast roaming

mDNS

Question 23

Refer to the exhibit. An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)
300-430 dumps exhibit

Configure the certificate, WLAN, and radio interface on WGB.

Configure the certificate on the WLC.

Configure WLAN to authenticate using ISE.

Configure the access point with the root certificate from ISE.

Configure WGB as a network device in ISE.

Configure a policy on ISE to allow devices to connect that validate the certificate.

Question 24

Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
A.
300-430 dumps exhibit

Question 25

What is an important consideration when implementing a dual SSID design for BYOD?

After using the provisioning SSID, an ACL that used to make the client switch SSIDs forces the user to associate and traverse the network by MAC filtering.

If multiple WLCs are used, the WLAN IDs must be exact for the clients to be provisioned and traverse the network correctly.

SSIDs for this setup must be configured with NAC State-RADIUS NAC for the clients to authenticate with Cisco ISE, or with NAC State-ISE NAC for Cisco ISE to associate the client.

One SSID is for provisioning and the other SSID is for gaining access to the networ

The use of an ACL should not be enforced to make the client connect to the REAL SSID after provisioning.

Page: 1 / 5

Total 60 questions Full Exam Access