19 August, 2020

What Guaranteed HPE0-S58 Actual Exam Is

Want to know Actualtests HPE0-S58 Exam practice test features? Want to lear more about HP Implementing HPE Composable Infrastructure Solutions certification experience? Study Accurate HP HPE0-S58 answers to Up to the immediate present HPE0-S58 questions at Actualtests. Gat a success with an absolute guarantee to pass HP HPE0-S58 (Implementing HPE Composable Infrastructure Solutions) test on your first attempt.

Online HPE0-S58 free questions and answers of New Version:

Page: 1 / 8

Total 97 questions Full Exam Access

Question 1

A customer with a 3-frame Synergy composable infrastructure has received a second rack to expand existing composable infrastructure resource pools. The integrator has cabled the management ring as shown.
Which steps should the integrator take to increase availability of this configuration (Choose two.)
HPE0-S58 dumps exhibit

Move on Composer to Rack 2

Move both Composers to Rack 2

Enable multi-rack high availability in HPE OneView

Move both management uplinks to Rack 2

Move one management uplink to Rack 2

Question 2

A customer using HPE Synergy is unable to access certain VLANs from a single NIC port of a compute module.
Which configuration option in the server profile needs to be verified to ensure that the server profile has the correct configuration?

multiple Networks are assigned to the connection

multiple VLAN checkbox is selected

VxLAN has not been enabled

assigned Network Set includes all needed VLANs

Question 3

How many redundant fabrics are supported in an HPE Synergy frame?

Question 4

What does the hypervisor cluster profile feature of HPE OneView enable the integrator to accomplish?

configure a DRS cluster that provides load balancing functionality

enable Adaptive Optimization using SSMC that will optimize VM location

enable load balancing policies for the most important VMs using vCenter Server and traffic shaping policies

use the CPU affinity option to improve CPU scheduling

Question 5

Which technology used in HPE SimpliVity allows a reduction in storage consumption?

trunking

hashing

consolidation

compression

Question 6

A customer needs to upgrade an HPE Synergy 12000 frame with an HPE Virtual Connect SE 32Gb Fibre Channel (FC) Module.
Which steps must the integrator take to install the upgrade?

Modify the Synergy 40Gb F8 Logical Interconnect Group (LIG), and add the FC uplink set and storage networks.

Create one redundant Logical Interconnect Group (LIG) with two uplink sets, one for SAN-A and one for SAN-B.

Create two new Logical Interconnect Groups (LIGs) that are non-redundant Side-A/Side-B, one for SAN-A and one for SAN-B.

Edit the Enclosure Group and specify HPE Virtual Connect SE 32Gb FC Module in interconnect bays 1 and 2.

Question 7

A customer needs to deploy additional management components, such as vCenter Server and HPE Global Dashboard.
According to HPE best practices, how should an integrator deploy these components?

Deploy VMware HA cluster on two dedicated management servers, then deploy management components to this cluster.

Deploy vCenter Server as a virtual machine on the Hyper-V host and HPE Global Dashboard to the domain controller.

Install vCenter Server on the domain controller, then deploy HPE Global Dashboard to the HPE Composer or HPE OneView appliance.

Deploy vCenter Server to any Windows machine, and install HPE Global Dashboard on the same server.

Question 8

A customer is considering implementing a DRS cluster, but they would like to know how DRS can help to achieve performance goals.
How should an integrator respond?

When powering on a virtual machine, a DRS cluster can automatically place it on the optimal host.

Selected virtual machines will be assigned higher priority when the amount of physical resources will drop below a specific level.

A DRS cluster will migrate a virtual machine to a different host when available network bandwidth will drop below a specific level.

If more than 50 virtual machines will be running on a single host, DRS cluster will configure CPU affinity to proportional resource allocation.

Question 9

Match each interconnect device with its appropriate use case.
HPE0-S58 dumps exhibit

Solution:
References: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05385134 https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04815127.pdf

Does this meet the goal?

Yes

Question 10

A customer has the following HPE Synergy solution:
HPE0-S58 dumps exhibit

three Synergy frames
HPE0-S58 dumps exhibit

two HPE Virtual Connect SE 32Gb Fibre Channel (FC) modules in each time
HPE0-S58 dumps exhibit

two HPE Virtual Connect SE 40GB F8 modules
HPE0-S58 dumps exhibit

four HPE Synergy 10Gb Interconnect Link Modules
Click the menu option the integrator should use to add more uplinks ports from HPE Virtual Connect SE 32 Gb FC modules to SAN uplink set.
HPE0-S58 dumps exhibit

Solution:
References: https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04815258.pdf

Does this meet the goal?

Yes

Question 11

An integrator is installing three Synergy frames in different locations for a customer. As part of the installation, the customer requests a single monitoring dashboard that shows the current hardware status, warranty status, and open support cases of all three frames.
Which configuration steps must the integrator perform to provide the customer with this functionality?

Enable Remote Support and Insight Online Integration in the Composer UI

Install Insight Remote Support Advanced, and integrate it with HPE Global Dashboard

Configure OneView with iLO Amplifier pack

Activate iLO Federation on all installed compute nodes

Question 12

A customer tries to revert a data volume located on the HPE 3PAR array to a specific snapshot that was taken using HPE Composer, but the process fails. What must an integrator do to fix this problem?

Install the snapshot agent on the operating system to enable online snapshot operations

Select the “Force” checkbox to ignore the warning, and revert to the snapshot because this is a data volume

Navigate to the SSMC and revert to the snapshot using HPE 3PAR tools

Disconnect the volume from the server, then revert to the snapshot and reconnect back to the server

Question 13

A customer has forgotten the password for the HPE Composer managing the customer’s HPE Synergy Infrastructure.
Where can the customer reset the password with the assistance of HPE Support?

FLM Access to Synergy Console

Virtual Center server

Front Access Panel to Synergy Console

Maintenance Console screen

Question 14

What are valid uses for an IPv4 address pool when configuring an HPE Synergy solution? (Choose two.)

assignment of IP addresses for NICs in an operating system

assignment of IP addresses for Composer appliances

assignment of IP addresses for PXE booting to a deployment server

assignment of IP addresses for interconnect modules

assignment of IP addresses for iLOs

Question 15

A customer wants to expand their existing cluster using the Grow Cluster functionality from OneView for vCenter Server.
Which OS build plan managed by HPE OneView for vCenter Server can the customer use?

ICsp-Based Deployment

iLO Federation-Based Deployment

Image Streamer-Based Deployment

PXE-Based Deployment

Question 16

A customer is using HPE Synergy Composer to manage the compute module and 3PAR volume attachments.
The datastore attached to the VMware servers has run out of space.
What is the most efficient procedure the integrator should follow to extend the volume with minimum effect on the compute modules?

Set the volume to maintenance mode, and increase the volume in 3PAR SSMC

Increase the capacity of the volume in the combined profile form

Create a snapshot, and increase the capacity of the snapshot directly in the Synergy Composer

Increase the capacity of the volume directly in the Synergy Composer

Question 17

A customer has the following configuration: Frame 1
HPE0-S58 dumps exhibit

Bay 1 – HPE Synergy 12Gb SAS Connection Module
HPE0-S58 dumps exhibit

Bay 2

Bay 3 – HPE Virtual Connect SE 40 GB F8 Module
HPE0-S58 dumps exhibit

Bay 4 – HPE Synergy 12GB SAS Connection Module
HPE0-S58 dumps exhibit

Bay 5

Bay 6 – HPE Synergy 10 Gb Interconnect Link Module
Frame 2
HPE0-S58 dumps exhibit

Bay 1 – HPE Synergy 12Gb SAS Connection Module
HPE0-S58 dumps exhibit

Bay 2

Bay 3 – HPE Synergy 10Gb Interconnect Link Module
HPE0-S58 dumps exhibit

Bay 4 – HPE Synergy 12Gb SAS Connection Module
HPE0-S58 dumps exhibit

Bay 5

Bay 6 – HPE Virtual Connect SE 40Gb F8 Module
How many more frames can the customer add to their Synergy composable fabric? (Note: Enter your answer in the answer field below.)
Solution:
Frame 1 – Bay 2 – HPE Virtual Connect SE 100Gb F32 Module for Synergy (867796-B21)
Frame 1 – Bay 5 – HPE Virtual Connect SE 16Gb Fibre Channel Module for Synergy (779227-B21)
Frame 2 - Bay 2 – Brocade 16Gb/24 Power Pack+ Fibre Channel SAN Switch Module for HPE Synergy (K2Q86A)
Frame 2 – Bay 5 – HPE Synergy 4820C 10/20/25Gb Converged Network Adapter (876449-B21)

Does this meet the goal?

Yes

Question 18

Using SSMC, an integrator has added a new CPG on the HPE 3PAR StoreServ array integrated with HPE Composer.
The new CPG is not visible in the HPE Composer.
What must the integrator do to see the new CPG in the HPE Composer console?

Run the discovery process on the 3PAR StoreServ array from the SSMC interface.

Add the CPG using the HPE Composer interface.

Add the CPG to the Storage Components scope using the SSMC interface.

Run the refresh procedure on the 3PAR StoreServ array from HPE Composer

Question 19

Which component must be deployed at the customer site and is essential for HPE InfoSight for Servers?

HPE Intelligent Provisioning

HPE Global Dashboard

iLO Amplifier Pack

HPE Composer

Question 20

A customer has two Synergy frames using HPE Virtual Connect and 20Gb satellite modules linked together. What is the maximum number of frames that can be added to this configuration? (Note: Enter your answer in the answer field below.)

Question 21

Refer to the exhibit.
HPE0-S58 dumps exhibit

An integrator needs to add an FCoE connection to the server profile, but the FCoE connection type is not available.
What is the likely cause of this issue?

FCoE capable interconnect modules are not installed in the Synergy frame

Defined FCoE network is not associated with a SAN or does not have VLAN Id defined

A FCoE connection is not available, as there is no LIG configured for FCoE connectivity

The FCoE connection has not been added as a Fibre Channel connection within a server profile

Question 22

Match each HPE server platform with optimal workload.
HPE0-S58 dumps exhibit

Solution:
HPE0-S58 dumps exhibit

Does this meet the goal?

Yes

Question 23

Refer to the exhibit.
HPE0-S58 dumps exhibit

A Synergy integrator needs to establish the module cluster links between two master modules, as shown. Which ports can the integrator use for the module cluster links?

1 and 2

3 and 4

5 and 6

7 and 8

Question 24

A customer requires all automated Fibre Channel zones to have a prefix of “SYNERGY” in the automatically-generated zones.
Click where the integrator should change the naming policy.
HPE0-S58 dumps exhibit

Solution:
HPE0-S58 dumps exhibit

Does this meet the goal?

Yes

Question 25

Refer to the exhibit.
HPE0-S58 dumps exhibit

A customer has an HPE Synergy 2-frame configuration, as shown. The customer has a new project and needs to increase the number of compute modules.
What is the maximum number of compute nodes that the customer’s fabric could support?

Page: 1 / 8

Total 97 questions Full Exam Access